Archeci
Member Since: 17 Jul 2009
Location: East Yorkshire
Posts: 558
|
Hello all
Just after a bit of advice over the last few days I've noticed a faint groaning noise when driving the car any ideas?
Led Tonga Green TDV6 S
Remember laughing or smiling confuses the management.
|
2nd Aug 2012 4:19 pm |
|
|
|
Archeci
Member Since: 17 Jul 2009
Location: East Yorkshire
Posts: 558
|
I've just taken the Disco out and round to a mates, who is a former mechanic and former service manager. Within minutes he'd diagnosed the problem as a front wheel bearing and I suspect the same nearside one that I had replaced about two years ago at Duckworths.
I should have realised myself, as it its louder on left hand bends and corners as the nearside loads up and quieter on right hand bends and corners.
So my next question, is there a how to for changing front wheel bearings?
Cheers
Lee Tonga Green TDV6 S
Remember laughing or smiling confuses the management.
|
2nd Aug 2012 5:06 pm |
|
|
Brian GOG
Member Since: 10 Feb 2011
Location: Leeds
Posts: 71
|
It's comes as a full hub assembly. I've just ordered 1 today from L/R to replenish stock. You'll need the caliper and disc off. Hub nut and the hub itself is held in with 4 bolts through the hub carrier similar to the Disco Td5. The only potential problem is the driveshaft been siezed in. ( Although if it's the same side again they might have put some grease / oil on it !! )
|
2nd Aug 2012 11:31 pm |
|
|
CDS
Site Sponsor
Member Since: 12 Oct 2009
Location: All over the UK!
Posts: 3331
|
Here you go:
http://www.disco3.co.uk/gallery/albums/use...cement.pdf
The easiest way to get the hub nu toff is with an impact driver, though can be done with a breaker bar also.
You might find Bodsy's Brake Bible helpful as well as some of the same stuff needs to be removed and reassembled to do the hub
Discovery 3/4 & RRS keys cut and programmed at your home or work
Apple CarPlay/ Android Auto retro fit - see it here
BAS Remaps/ EGR Blanking
Software updates/ enabling
Mobile Servicing & Repairs
|
3rd Aug 2012 9:23 am |
|
|
DiscoDunc
Member Since: 08 May 2006
Location: Bristol
Posts: 16390
|
I have two nearly new bearings for sale - done less than 1000 miles on them
http://www.disco3.co.uk/forum/topic81991.html Duncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide
|
3rd Aug 2012 9:30 am |
|
|