Gornalhills
Member Since: 17 Jul 2012
Location: Dudley
Posts: 153
  
|
ok folks here we go, simple questions but loads of answers needed. How many EGR valves does my disco 3 have ? Are they easy to remove ? Is the job hard to do (quite compitent home mechanic) ? How do i know when they are totaly  ??
|
 2nd Aug 2012 8:06 am |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6308
  
|
You have two valves bud one on each side don't knoww what year of car you have but if its a earlier than 2007 year then you can just blanked them off and forget about them, blanking kits for sale on here and takes about one hour.
Or if you want new valves then a couple of hours each side passenger side not as easy as the drivers side but take your time and its a home job if your ok with cars..They are held on to the egr cooler with torx screws..
Flack 
|
| 2nd Aug 2012 8:51 am |
|
|
Barn1e
D3 Decade
Member Since: 28 Aug 2006
Location: Mid-sussex
Posts: 2021
|
Take a look at the guide here from BAS http://bellautoservices.co.uk/products/lan...nking-kit/
Not difficult if you take your time and follow instructions, especially about putting cloth in way to avoid losing parts down side of engine. I also needed to use a quarter inch socket set with extension bars, my normal set was too large for the space. 2005, TDV6 S, Auto, 190k miles, owned from new, V8 Brake Upgrade, Nancom Evo, RLD protector, BAS EGR blanking & Remap, separate ATF cooler, changing all the fluids ahead of time.
|
| 2nd Aug 2012 7:14 pm |
|
|
