gazjacko
Member Since: 14 Jan 2012
Location: Portsmouth-ish
Posts: 230
  
|
had to get a new clutch but the garage is having trouble bleeding the system so the bite point is somewhere just off the pile of the carpet and it's difficult to engage 1st and reverse.
going back in this week but any pointers or tips for the mechanic would be useful
|
 26th Jun 2012 7:18 am |
|
|
sopjas
Member Since: 31 Dec 2008
Location: Its never Dull in Hull
Posts: 280
 
|
Use the bleed kit that attaches to the master cylinder and uses the air from the tyres to force fluid through. 
Doing this job manually the last time i did one would not bleed correctly. 
Hope this helps with your problem. 'Just because you're breathing doesn't mean you're alive'
Buckingham blue, Webast timer/remote, AT2s, Black & Silver ovals ,
Privacy Glass , Drilled and Groved Discs , Xenons, Rear LED's , Light Guards,Hawkeye diagnostic unit.
TL1000R--XR600R--
|
| 26th Jun 2012 10:25 am |
|
|
gazjacko
Member Since: 14 Jan 2012
Location: Portsmouth-ish
Posts: 230
|
Cheers will try again
|
| 26th Jun 2012 1:10 pm |
|
|
