Member Since: 12 Dec 2010
Location: Suffolk
Posts: 18
Fuel filler flap unsprung
Hi All,
Whilst my fuel filler flap locks and unlocks with the central locking it doesn't spring open when you press it . You have to place something thin in the gap and gently pull it open.
Yup, mine was the same on purchase, the spring part gets knocked off quite easily, parts were no more than £2 and a 30 second fixI started off with nothing and Ive still got most of it left.
....Back of the car & the place where the thing that passses for a jack is stored allows access to the cable that provides the central locking aspect can be disconnected (easily)
The is allows you to see how simple the mechanism is & is useully fixable.
Have a look......there isnt that much to go wrongBREXIT - done properly.
Right now ...We need Government - not Politics
Save the Dipstick Flagbearer-keep it simple, less likely to fail campaign-agenda items:Starting Handles, Acetylene Lamps.
Founder: Dipsticks-R-Us Inc
D3 HSE-perfectly formed, passenger friendly...has real DIPSTICK
Jag XK-but sadly no DIPSTICK...HUGE design fault
FL2 has DIPSTICK..."real comfort in rear seats"
VW Golf wondermobile (?)..has real DIPSTICK
Morris Minor..original DIPSTICK technology..and a real KEY.
20th Jun 2012 2:01 pm
smaskins
Member Since: 16 Jun 2009
Location: SE London/Kent
Posts: 295
Re: Go in the...
BLFarrar wrote:
...there isnt that much to go wrong
But it does.......That's the beauty of LandRovers
20th Jun 2012 2:05 pm
SteveNorman
Member Since: 14 Oct 2005
Location: Somerset
Posts: 1145
You usually need:
1 x ARV78020 bezel
1 x CAL500070 boot.
this clips on the flap part.
regards
Steve
20th Jun 2012 3:03 pm
jeccles2
Member Since: 12 Dec 2010
Location: Suffolk
Posts: 18
Thanks very much you guys for the swift response and particularly to SteveNorman for the part numbers.
Regards to all.
20th Jun 2012 3:13 pm
chris0leary
Member Since: 18 May 2012
Location: Cumbria
Posts: 122
Nice one.
I need mine done too.
20th Jun 2012 7:21 pm
Hess
Member Since: 07 Mar 2011
Location: Highlands
Posts: 1533
I found an image of it, mine is knackered too...
I'm missing this bit, anyone know the part number for that one?
20th Jun 2012 8:27 pm
SteveNorman
Member Since: 14 Oct 2005
Location: Somerset
Posts: 1145
The part numbers I gave are the two peices to the right of the red circled bit.
The red circled bit is BPA780101.
the next bit back is BPA780110
the small spring is BPA780120
regards
Steve
21st Jun 2012 6:17 am
Hess
Member Since: 07 Mar 2011
Location: Highlands
Posts: 1533
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum