Member Since: 03 May 2005
Location: Perth, Scotland
Posts: 1268
Fitting Spots
I fitted spots to my old TDi a few years back. I wired them into the headlight main beam circuit so they only came on with the 'brights'. Does anyone know which wire this might possibly be on the D3? I found the TDi equivalent in a Haynes manual.No longer a D3 owner but still subscribed to multiple threads!
13th Dec 2006 12:34 pm
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
Member Since: 03 May 2005
Location: Perth, Scotland
Posts: 1268
Cheers.
Looks like my next daft question will be: how do I mount non-LR lamps e.g. KC Dayliters? Looked at the fitting instructions for the LR A-bar and LR lights and it appears they are separate, unlike on the old TDi, where the lights slotted into 2 holes in the middle of the A-bar.No longer a D3 owner but still subscribed to multiple threads!
13th Dec 2006 1:45 pm
SN
Member Since: 03 Jan 2006
Location: Romiley
Posts: 13710
Depends if you've got an A Bar or not? dickgriff has a nonstandard set mounted on his A-Bar - the mount points look easy to make a bracket to fit on to them. If you've no A-Bar I think you need to buy the mount bracketsSteve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history)
13th Dec 2006 2:14 pm
nobbyclark
Member Since: 03 May 2005
Location: Perth, Scotland
Posts: 1268
I intend to get a LR A-bar.No longer a D3 owner but still subscribed to multiple threads!
13th Dec 2006 2:21 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50934
Nobby we just used the exisiting bracket that came with the lights but changed the bolt size to fit the threaded receivers built into the A bar.
Not a helpful picture really but shows how they looked after fitting
Member Since: 03 May 2005
Location: Perth, Scotland
Posts: 1268
So there is some sort of mounting mechanism on the bar itself?No longer a D3 owner but still subscribed to multiple threads!
15th Dec 2006 9:26 am
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50934
Yes ..it's designed more specifically for the LR spots ..each side has the receivers moulded into the rubber.. there are two bolt holes about an inch apart ...we just used one pair of bolt holes for the lightforce units.21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
15th Dec 2006 10:03 am
nobbyclark
Member Since: 03 May 2005
Location: Perth, Scotland
Posts: 1268
Excellent. Just need to source a cheap A-bar now...No longer a D3 owner but still subscribed to multiple threads!
15th Dec 2006 10:41 am
SN
Member Since: 03 Jan 2006
Location: Romiley
Posts: 13710
This should make it super clear...
The plastic block & bolts (shown on RH picture) comes with the LR Lamps but as DG said, the receiving holes for the bolts are built into the barSteve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history)
15th Dec 2006 11:08 am
nobbyclark
Member Since: 03 May 2005
Location: Perth, Scotland
Posts: 1268
Nice. A pair of black KCs should fit very snugly.No longer a D3 owner but still subscribed to multiple threads!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum