chesters
Member Since: 03 Oct 2005
Location: The Toon
Posts: 698
![](templates/vbnew/images/spacer.gif)
![2006 Discovery 3 TDV6 SE Manual Arctic Frost 2006 Discovery 3 TDV6 SE Manual Arctic Frost](../images/veh/arctic_frost.gif)
|
4 Wheel tracking a question |
|
Hi,
I have just fitted 4 new 19" HSE wheels and Grabber AT's.
Should I do a couple of hundred miles before i get my 4 wheel tracking done or straight away?
I got 35K out of my old 18" AT2's with a couple of the outside edges quite worn.
Cheers Paul. Arctic Frost Discovery 3 TDV6 SE, Active Rear Diff, Adaptive Head Lights, Tow Pack, Ebony Leather, Roof Rails, Mantec Guard. Tasmod Stainless Sill plates. Grabber AT's. Home made mud flaps. Side Steps back on until the next time.
|
6th May 2012 1:54 pm |
|
|
InnuendoMaster
Member Since: 09 Oct 2011
Location: Whitstable
Posts: 384
![](templates/vbnew/images/spacer.gif)
![2012 Discovery 4 3.0 SDV6 HSE Auto Fuji White 2012 Discovery 4 3.0 SDV6 HSE Auto Fuji White](../images/veh/fuji_white.gif)
|
Personally if the outside edges were worn before, I would have sorted the tracking before fitting tyres. It's only going to do the same I would have thought.
|
6th May 2012 2:05 pm |
|
|
Fudpucker
Member Since: 30 Jan 2012
Location: Banbury
Posts: 202
![](templates/vbnew/images/spacer.gif)
![2006 Discovery 3 TDV6 HSE Auto Zermatt Silver 2006 Discovery 3 TDV6 HSE Auto Zermatt Silver](../images/veh/zermatt_silver.gif)
|
I would set the tracking as soon as the tyres are fitted, before any wear. It's no good setting up with worn tyres.
|
6th May 2012 3:42 pm |
|
|