Saltydog
Member Since: 21 Feb 2011
Location: Aberdeenshire
Posts: 45
|
After only a few thousand miles I have this morning had a Gearbox Failure Warning and a Yellow Triangle. I tried to stop the engine and restart but the gear dial stayed up and indicators green, after the second attempt the car restarted and the dial came back to life. Seems to have cleared itself now but anyone had the same problem ???? Brand Loyalty Is An Expensive Business
Defender Series II ( green )
Defender Series III ( red )
Discovery 1 ( silver )
Discovery 2 ( green )
Discovery 3 ( silver )
Range Rover ( black )
Freelander ( green)
Discovery 3 ( black )
Discovery 4 ( black )
Discovery 4 ( blue )
Defender 90 HT ( green )
Defender 90 HT ( grey )
Discovery Sport ( silver )
Defender 110 XS UW ( grey ) current
Discovery 4 Landmark ( black ) current
|
26th Mar 2012 8:17 am |
|
|
stick
Member Since: 13 Jan 2010
Location: hants
Posts: 604
|
I had it twice when started car in lo range and used it fine, when switched to high range weent to failure and yellow triangle. Haven't started in lo range since so don't know what that was all about d4 HSE
|
26th Mar 2012 8:26 am |
|
|
karsteb
Member Since: 10 Aug 2014
Location: Oslo
Posts: 12
|
Thank you Salty for the tip - have to love this forum.
Same problem here on 2014 D4 with ZF 8HP 8 speed gearbox (command wheel instead of stick). Enabling low range, returning to park, then restart fixed it for me.
Symptom
- started car ok, selected reverse and got message "gearbox fault" and yellow triange, message persists when returning knob to P, drive does not work either, engine revs but no movement, outside temperature -15C but no temp related problems before.
- several restarts did not work
Problem
No idea.
Solution
- put knob into neutral
- press low range. Again the "gearbox fault" plus the whole christmas tree lights up with all sorts of failures. Low range does not engage and low range indicator keeps blinking.
- put knob into park. Low range indicator keeps blinking.
- restart car and problem gone
Maybe time for a software update since this was the first model year with the ZF 8HP
|
27th Jan 2022 1:50 pm |
|
|
wealy
Member Since: 16 Oct 2012
Location: United Kingdom
Posts: 5
|
My daughters model 2015 has developed this?
I've done the above but its back? Any suggestions?
|
27th Jan 2022 3:04 pm |
|
|