fezmech
Member Since: 24 Mar 2012
Location: rotherham
Posts: 4
  
|
| General Grabber AT's 19inch rubbing when full lock on.... |
|
Just had some General Grabber AT's fittered to my discovery 3 255/55/19, been tracked but still hearing noise when full lock on to right. When ive looked the passanger front wheel is just catching the inside of the wheel arch. Has anyone else had this problem or does it need retracking.
|
 24th Mar 2012 1:48 pm |
|
|
sj9011
Member Since: 04 Jun 2011
Location: Southampton
Posts: 356
 
|
Nope 5k miles now lots of towing full lock no problems same tyres
Sean
|
| 24th Mar 2012 3:37 pm |
|
|
Stuarts the man
Member Since: 22 Sep 2011
Location: Glasgow
Posts: 423
 
|
Are all the fasteners there that hold inner wheel arch in place, if some are missing then arch liner can dislodge slightly
|
| 24th Mar 2012 5:04 pm |
|
|
Stuarts the man
Member Since: 22 Sep 2011
Location: Glasgow
Posts: 423
|
Are all the fasteners there that hold inner wheel arch in place, if some are missing then arch liner can dislodge slightly
Is it standard discovery rims you are running or is it range rover alloys that are on it
|
| 24th Mar 2012 5:05 pm |
|
|
luvbus
Member Since: 04 Mar 2007
Location: Foot of Rudland Rigg
Posts: 829
|
The FBH exhaust runs down the forward inner arch and the heat can soften the plastic so it sags a bit. You can adjust things a bit by warming up the mud shield with a heat gun and holding it in place as it cools.
Rich Club N.E.R.D.s
|
| 24th Mar 2012 6:29 pm |
|
|
