Member Since: 23 Aug 2016
Location: Laakdal
Posts: 14
what about the clutch pipe,
where do you loosen this? Theres some kind of a connector neer the slave cylinder but that seems to be rusted solid
1st Jun 2024 4:08 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4809
There's a flexi line from the fluid damper to the bleed valve on the side of the gearbox. The line is held to the bleed valve with a clip. If you remove the clip the line will pull away from the valve.
There is no need to touch the damper and can be left in place, just clamp the flexi once you have removed it to stop it dripping fluid. You will need a pressure bleeder and lots of patience when bleeding the clutch later.yµ (idµ - eAµ) ψ=mψ
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
