ronimac
Member Since: 17 Feb 2012
Location: oban
Posts: 11
  
|
EPB again, replaced rear discs etc on existing shoes, adjusted as per manual but on 8th apply during bedding in epb lever failed, does nothing on apply or removal of key. orange P and flashing red P on touching lever, also parking sensors cotinuously bleeping when moving. Parkbrake fault system not functional. any suggestions?
|
 17th Feb 2012 9:36 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6241
 
|
It needs to be looked at via a code reader to see what error codes are logged, you say the epb was adjusted as per manual was that workshop manual or by Bodsy Brake Bible on the forum.
It sounds like the epb has over run and locked it out with the errors, have you tried pulling the epb manual release to see if that resets it.
Flack
|
| 17th Feb 2012 11:12 pm |
|
|
ronimac
Member Since: 17 Feb 2012
Location: oban
Posts: 11
|
I used both the official manual and Bodsy's. I have not tried the manual release as yet, may try that tomorrow.
thanks.
|
| 17th Feb 2012 11:42 pm |
|
|
ronimac
Member Since: 17 Feb 2012
Location: oban
Posts: 11
|
I should have added the brake does not apply, is it still wise to pull the emergency cable?
|
| 18th Feb 2012 12:12 am |
|
|
