Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Maintenance & Mods (D3)

Cracked Pipe
Post Reply  Down to end
Page 1 of 1
toby653
 


Member Since: 16 Dec 2011
Location: ypres
Posts: 26

Belgium 2005 Discovery 3 TDV6 S Auto Java BlackDiscovery 3
Cracked Pipe

Hello

Was changing the oil filter today and being in a rush caught the little pipe that sits next to the filter housing bowl it has and electrical connection to it in a junction where it then goes three ways on pipe goes dow to then engine and the other two run opposite directions along the engine to somewhere on the sides the connection is red and is a sensor of some kind mine has broken off on the pipe that goes from this connection down to the engine block beside the oil filter housing is is curled around do it sits down and is very brittle

Looks the the pipes are all in one unit joinning to this red plug what are these pipes and where what do they feed and how go is replace them many thanks sorry for the long ramble cant get a photo just now
  
Post #87645629th Dec 2011 9:25 pm
View user's profile Send private message View poster's gallery Reply with quote
toby653
 


Member Since: 16 Dec 2011
Location: ypres
Posts: 26

Belgium 2005 Discovery 3 TDV6 S Auto Java BlackDiscovery 3

just looked at the thread Oil change instructions for TDV6 and the red connection is shown quite clearly in picture three and the two pipes out of the three running across the engine can be seen as well they are the grey small ones as they seem to be insulated or heat proofed the on that has snapped which goes from the red connector dowards to the engine seems to be a very small inside diameter and has oil in it? or oil deposits is it an oil pressure pipe sensor? many thanks
  
Post #87646329th Dec 2011 9:44 pm
View user's profile Send private message View poster's gallery Reply with quote
toby653
 


Member Since: 16 Dec 2011
Location: ypres
Posts: 26

Belgium 2005 Discovery 3 TDV6 S Auto Java BlackDiscovery 3

Is it the injesctor leak off pipe? It was very very brittle it just caught on my coat cuff and snapped I think diesel may have made it brittle if it is the leak off hose

Is it possible to fit a new one or am I going to have to take loads of stuff off to get at it?

Many thanks
  
Post #87650329th Dec 2011 11:22 pm
View user's profile Send private message View poster's gallery Reply with quote
Bushwanderer
 


Member Since: 27 Nov 2007
Location: Northern Rivers, NSW, Australia
Posts: 2050

Australia 2005 Discovery 3 TDV6 S Manual Buckingham BlueDiscovery 3

Hi toby,
I'm just speculating, but perhaps a bit of "heat shrink" tubing may solve your problem.

Best Wishes,
Peter
 The Bearded Dragon  
Post #87654730th Dec 2011 3:33 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site