Member Since: 22 Jul 2010
Location: northumberland
Posts: 5
air suspension fault
hope u guys can help fault with n/s front local specialists have changed ride height sensor and short piece of loom but still fault.is there another part in the loom that we need to be checking. repair bill getting bigger for nothing cheers marc
5th Dec 2011 8:57 pm
John C
Member Since: 28 Aug 2007
Location: East Yorkshire
Posts: 3292
What are your symptoms?2020 SDV6 D5 HSE, Carpathian Grey +
2022 Tesla Model Y LR... almost Carpathian Grey
Previously : 2005 TDV6 SE Auto, Cairns Blue (288K) - ours for 16 years
5th Dec 2011 9:44 pm
NickJ
Member Since: 11 Oct 2010
Location: there's no f in point
Posts: 2137
I'm sure that someone once posted on here that it can be the opposite side sensor that can actually be the one at fault...
5th Dec 2011 9:53 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Given the price of the sensors vs the pain trying to diagnose then changing all 4 makes a lot of sense. With the sensors out of the way any remaining problems must reside with the wiring.Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 22 Jul 2010
Location: northumberland
Posts: 5
air suspension fault
normal ride height only on display,it seams like it starts to rise then stops.thanks marc
5th Dec 2011 10:27 pm
John C
Member Since: 28 Aug 2007
Location: East Yorkshire
Posts: 3292
Compressor not running when you turn off the ignition?2020 SDV6 D5 HSE, Carpathian Grey +
2022 Tesla Model Y LR... almost Carpathian Grey
Previously : 2005 TDV6 SE Auto, Cairns Blue (288K) - ours for 16 years
5th Dec 2011 10:28 pm
landy marc
Member Since: 22 Jul 2010
Location: northumberland
Posts: 5
air suspension fault
could hear compressor running last time i checked.two garages have had it on computer and been pointed to n/s front.might just replace other side sensor? just thought it could be broken loom in that area? marc
5th Dec 2011 10:35 pm
landy marc
Member Since: 22 Jul 2010
Location: northumberland
Posts: 5
air suspension fault
Got car back from garage today water in main loom going to n/s front loom then the sensor.All working again They said its a common fault and they have done 7? thanks for the replies marc
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum