I am looking to remove the rear anti roll bar on the V8, the car will be on axle stands for this, once the ARB bolts are out and the drop links removed will the rear anti roll bar just pull out on either side? or is there something else to remove?
thanksD3 4.4 V8 2005 sadly now gone
Freelander 2 i6 HSE now gone was a very good 4x4
Triumph TR8
28th Oct 2023 3:04 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4891
You need to raise the body from the chassis to remove the rear ARB.yµ (idµ - eAµ) ψ=mψ
PROFSR G thanks,why do Land Rover always make "simple" stuff difficult, when you say raise the body is that by some margin or just loosening the body to chassis bolts?D3 4.4 V8 2005 sadly now gone
Freelander 2 i6 HSE now gone was a very good 4x4
Triumph TR8
Member Since: 06 Mar 2017
Location: Lost
Posts: 4891
1powerrack wrote:
PROFSR G thanks,why do Land Rover always make "simple" stuff difficult, when you say raise the body is that by some margin or just loosening the body to chassis bolts?
Manufacturers no longer design maintenance considerations into their products, but to be fair it's hard to see how LR could have done it differently. A few inches will get you the access you need but loosen all the bolts and remove the first two or three sets from the rear.yµ (idµ - eAµ) ψ=mψ
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
