Member Since: 16 Apr 2008
Location: Yorkshire
Posts: 17
Air Bag and EPB warning lights.How or where can I get reset
EPB was replaced by a local garage but garage couldn't cancel the warning light. I tried taking the fuse out but that upset the airbag light and that came on, oops! Does anyone know where I can get them reset excluding main dealer as that's too far to go. I'am near scarborough on the east coast, or could I hire the reset tool somewhere. Any ideas please.
29th Aug 2011 5:50 pm
JDB
Member Since: 25 Mar 2010
Location: NW Hampshire
Posts: 2486
First thing to try is - open the bonnet, then let the car go to sleep (at least 2 minutes and/or until the handbrake light is off). Then disconnect the battery terminals, then short them together (when off the battery) with a screwdriver or similar this will reset the system. Re-assemble and see if any of them have gone,
If not then its a fault code reader or Faultmate owner near you that is required - I am too far away tohelp!
29th Aug 2011 6:06 pm
MikeG
Member Since: 16 Apr 2008
Location: Yorkshire
Posts: 17
Thanks, i'll give it a go, but just went out to the car and the bonnet catch went. This car has got it in for me. Anyone know how to open the bonnet ?
29th Aug 2011 8:01 pm
MikeG
Member Since: 16 Apr 2008
Location: Yorkshire
Posts: 17
Tried the hard reset but it hasn't worked. Any more ideas ??
30th Aug 2011 11:48 am
Q86ARR
Member Since: 23 Feb 2010
Location: Jersey
Posts: 378
If you have had the EPB module replaced it will require the inclination sensor calibrating using SDD.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum