Hi, I want to fit a Safari snorkel to my 2005 Disco 3 S TDV6 but need to know how to remove the following parts first.
Air cleaner assembly
Right hand wheel arch liner
Air intake grille and air ducting
'A' pillar trim
Can anybody out there help me.
16th Oct 2006 11:07 pm
sijui
Member Since: 03 Mar 2006
Location: Rosebank
Posts: 81
Here is the web site that shows you how to fit the snorkel
Member Since: 05 May 2006
Location: Bundaleer
Posts: 4805
I believe the A pillar is removed by opening the bonnet and then just pulling it off, it also says that the clips must be renewned
to remove the wheel arch liner you need to remove the mudflap, then the 4 retainers holding the wheel arch moulding, remove the 2 screws then pull off unclipping the 10 clips. once the fender moulding is removed you then remove a further 2 screws and 6 retainers and pull out the wheel arch liner
air intake grille is lift up and pull out. the rest I think you should be able to look for the approriate screws etc unless someone else bother to inform you as I dont know.
17th Oct 2006 9:16 am
sijui
Member Since: 03 Mar 2006
Location: Rosebank
Posts: 81
I realise the site doesn't help with the preparation
17th Oct 2006 9:32 am
TravisTX
Member Since: 01 Sep 2006
Location: Houston, Texas
Posts: 21
Take a look in my gallery for some (possibly) helpful .pdf files.
17th Oct 2006 1:46 pm
norto
Member Since: 10 Apr 2006
Location: batemans bay
Posts: 1605
Tut
i fitted a safari snorkle to mine on sunday
the a pillar mould pulls straight off, the same goes for the air intake grille
to remove the wheel arch you have to take the grille off (push the clips down), then remove the left headlight (pull up the black metal tags on either side of the head light, pull the head light forward and unclip the wiring). there is a screw that runs from behind the head light into the front of the wheel arch and you cant get at it with the head light in place, then pull the wheel arch off after you have removed the clips and screws underneath and remove the inner guard lining
then follow the fitting instructions
you can give me a call me if you need any help
regards
Last edited by norto on 19th Feb 2008 4:00 am. Edited 1 time in total
Thanks guys - Jamo, Norto, TravisTX, Sijui, & Catweasel for the info.
Driving down to Perth tonight to for a few days R&R and will be picking the snorkel up when I'm down there. Should have it fitted in a couple of weeks time and will let you know how I go on. Thanks again
Tut
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum