Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
D3 is very simple to enable .. Don't have a problem doing that G4 Gone ...but not forgotten
10th Jul 2011 2:41 pm
kenny
Member Since: 17 Jan 2010
Location: South West Aus
Posts: 79
I've enabled mine, I'm not sure how to get a copy of the ccf though. Happy to try?
From memory I set the mode to Canandian DRL as well as enabled them elsewhere, I had to do both though
11th Jul 2011 5:19 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
If you go into body control on the fault mate ... Then ccd ... You will be able to save the file ... It's located on the left hand side ( it saves in a HTML format )
Then do the same for the eucd file in the body control
I will pm my email just in case you can send the files
Many thanksG4 Gone ...but not forgotten
11th Jul 2011 8:56 am
merlin1
Member Since: 18 Nov 2010
Location: lands end
Posts: 10
rrs
hi wiggs have you got anywere on this as i want to enable mine with faultmate on a 2010 rrs cheers chris
20th Jul 2011 11:32 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Yes ...thanks too Kenny
just go in the ccd file and enable either canadian or scandinadian lights ...thats it . There are other bits that say "daytime running lights enable / disable ...just ignore them .
So on mine it was just canadian running lights ..enabled .
Then whenever your in D,N ,R without the h/break the lights will be on .G4 Gone ...but not forgotten
20th Jul 2011 11:57 am
Russell
Member Since: 23 Aug 2007
Location: Kent
Posts: 10564
Does that end up with the head lights or the fairy lights on?MY17 D5 1st Edition Namib Orange
MY15 D4 HSE Kaikoura Stone
MY12 D4 HSE Nara Bronze Sold and gone
MY11 D4 HSE Stornaway Grey Sold and gone
D3 S spec Silver Sold and gone
Tow bar, full length roof bars, side steps, tow bar storage unit, surround camers.
D4 camera club
20th Jul 2011 12:10 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
both ...same as what would be dipped beamG4 Gone ...but not forgotten
20th Jul 2011 12:11 pm
merlin1
Member Since: 18 Nov 2010
Location: lands end
Posts: 10
rrs
cheers will do this evening thanks from foggy cornwall.
20th Jul 2011 12:27 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
light switch needs to be in the off or auto position .
I leave mine in the auto positionG4 Gone ...but not forgotten
20th Jul 2011 12:31 pm
merlin1
Member Since: 18 Nov 2010
Location: lands end
Posts: 10
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum