Member Since: 12 Oct 2005
Location: Adelaide
Posts: 59
No longer considering, its in the driveway
A big thanks to those who helped me decide and eveyone who posts here making it a fantastic forum full on information.
Today I took delivery on a new TDV6 SE in Zambesi Silver, no extras yet, just floor carpet mats, so now I have alot to learn about the ins and outs of the Disco3.
But for those of you who read my initial post 'considering a disco3' you may have read the we were expecting our first born when I started looking at the discovery, well the little fella arrive 3 weeks early, very healthy and without any complications, so not only did I pick-up the Disco, I went from the dealer to the hospital and collected my wife and new son, wow what a day, what a week.
So the first thing to do is make the needed mods so I can use my MP3 player on the AUX input of the standard audio system, I have looked around the forum but can't find any clear instructions, any help will be great.
Also, is there a checklist for new disco3 owner to ensure everything in OK.
I'm off to read the owners manuals, pitty the new son didn't come with one!
Last edited by ontheridge on 12th Nov 2005 11:03 am. Edited 1 time in total
12th Nov 2005 9:04 am
simon
Member Since: 11 Jan 2005
Location: Shropshire
Posts: 18296
Congrats on your new arrivals
And good luck with the human... will be far more stressful than anything read on the forum so far
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26772
Re: No longer considering, its in the driveway
ontheridge wrote:
A big thanks to those who helped me decide and eveyone who posts here making it a fantastic forum full on information.
Today I took delivery on a new TDV6 SE in Zambesi Silver, no extras yet, just floor carpet mats, so now I have alot to learn about the ins and outs of the Disco3.
But for those of you who read my initial post 'considering a disco3' you may have read the we were expecting our first born when I started looking at the discovery, well the little fella arrive 3 weeks early, very healthy and without any complications, so not only did I pick-up the Disco, I went from the dealer to the hospital and collected my wife and new son, wow what a day, what a week.
So the first thing to do is make the needed mods so I can use my MP3 player on the AUX input of the standard audio system, I have looked around the forum but can't find any clear instructions, any help will be great.
Also, is there a checklist for new disco3 owner to ensure everything in OK.
I'm off to read the owners manuals, pitty the new son didn't come with one!
Wow, new Disco, new son, does not get better than that. Lets hope they both live up to expectations.
12th Nov 2005 11:10 pm
ontheridge
Member Since: 12 Oct 2005
Location: Adelaide
Posts: 59
So you guys were all correct in saying how great the Disco is to drive and own, at least so far the 600km we have done around Adelaide, the hills and a bit of forest driving have been a dream.
I have done my first mod, this was to make the connection between athe AUX input on the back of the radio to my MP3 player, very easy, considering i'm a electrician and electronics technician.
Next is tinted windows(privacy glass) tomorrow then its time to install my Garmin MAP60C gps and a new UHF radio.
Has anyway bought one of the cargo area protection mats, any comments would be great + what about a roof rack, is the expidition rack good value.
I have done my first mod, this was to make the connection between athe AUX input on the back of the radio to my MP3 player, very easy, considering i'm a electrician and electronics technician.
Did you solder or manage to find the right connector? If so, do you have any details? I'm loathe to solder into my stereo but haven't yet found the right connector to fit in the aux slot of my base stereoDiscovery 3 tdv6 7 seat Buckingham Blue
Had it since new - sold Jun 17 after 12 years and 214,000 miles
23rd Nov 2005 10:02 am
ontheridge
Member Since: 12 Oct 2005
Location: Adelaide
Posts: 59
KL - I did tap into existing wiring and solder my wires to the three needed, the plug and connector a very small and I haven't seen anything similar in my time with electronics, it really was remarkably easy to get the dash apart and radio out.
Having a MP3 player connected with over 350 songs available is way better than any 6 disc CD player.
Cheers
ShaunD4 TDV6 MY13' - 2 weeks away!
RRS S/C MY10' - muchly loved and just gone
D3 TDV6 SE MY06' - loved and gone
KL - I did tap into existing wiring and solder my wires to the three needed, the plug and connector a very small and I haven't seen anything similar in my time with electronics, it really was remarkably easy to get the dash apart and radio out.
Having a MP3 player connected with over 350 songs available is way better than any 6 disc CD player.
Cheers
Shaun
Thanks Shaun. I guess with 350 songs you have a 1gb mp3 player. I'm looking forward to connecting my 30gb Creative player to the car and getting the 10,000+ songs on!Discovery 3 tdv6 7 seat Buckingham Blue
Had it since new - sold Jun 17 after 12 years and 214,000 miles
So you guys were all correct in saying how great the Disco is to drive and own, at least so far the 600km we have done around Adelaide, the hills and a bit of forest driving have been a dream.
I have done my first mod, this was to make the connection between athe AUX input on the back of the radio to my MP3 player, very easy, considering i'm a electrician and electronics technician.
Next is tinted windows(privacy glass) tomorrow then its time to install my Garmin MAP60C gps and a new UHF radio.
Has anyway bought one of the cargo area protection mats, any comments would be great + what about a roof rack, is the expidition rack good value.
Thanks again
Shaun
Shaun, great stuff. If you're after hints on UHF aerial mounting ask me and I'll find a link to a post I did awhile ago on my set up.
If you are after a good strong roof rack have a look at Tradesman Engineering. They have a number of variants for the D3 made in their "Oval" tubing in Steel or Aluminium. I use the rack for my Roof Top tent.
Tell them Chris told you to call them. I was their second customer and they did a great job.
Chris2011 Discovery 4 (MY12) SDV6 HSE with General Grabber AT's, Traxide Aux Battery system, custom rear drawers and Autosafe half height cargo barrier
Gone - 2005 Discovery 3 TDV6 HSE
ARB Bull Bar, Warn 9.5XP Winch, IPF D/Lights, Cooper STT's, LR Raised Air Intake, Traxide aux battery system, custom drawers and half height Autosafe cargo barrier, Mitchell Bros 4x4 tow hitch
24th Nov 2005 6:50 am
ontheridge
Member Since: 12 Oct 2005
Location: Adelaide
Posts: 59
The tinted windows done and make a huge difference as the days start to heat up + looks fantastic.
Chris - I think I've seen some previous posts regarding aerial mounts at the front coming from the grill on a custom bracket from 'anthill', any help from yourself will be appreciated.
Thanks for roof rack details, I'll do some more home-work.
CheersD4 TDV6 MY13' - 2 weeks away!
RRS S/C MY10' - muchly loved and just gone
D3 TDV6 SE MY06' - loved and gone
The tinted windows done and make a huge difference as the days start to heat up + looks fantastic.
Chris - I think I've seen some previous posts regarding aerial mounts at the front coming from the grill on a custom bracket from 'anthill', any help from yourself will be appreciated.
Thanks for roof rack details, I'll do some more home-work.
Cheers
Plenty of pics to work out how I made the bracket.
Chris2011 Discovery 4 (MY12) SDV6 HSE with General Grabber AT's, Traxide Aux Battery system, custom rear drawers and Autosafe half height cargo barrier
Gone - 2005 Discovery 3 TDV6 HSE
ARB Bull Bar, Warn 9.5XP Winch, IPF D/Lights, Cooper STT's, LR Raised Air Intake, Traxide aux battery system, custom drawers and half height Autosafe cargo barrier, Mitchell Bros 4x4 tow hitch
24th Nov 2005 10:28 am
ontheridge
Member Since: 12 Oct 2005
Location: Adelaide
Posts: 59
Thanks Chris, the photos will make it easy, I have a decent workshop at home and in my office so I should be able to produce the bracket easy, I even has access to a mate to get it galvanised.
I will do my GPS mount and wiring tomorrow, I will take some photos when I'm done.
ShaunD4 TDV6 MY13' - 2 weeks away!
RRS S/C MY10' - muchly loved and just gone
D3 TDV6 SE MY06' - loved and gone
25th Nov 2005 9:58 am
brian
Member Since: 17 Sep 2005
Location: Melbourne
Posts: 13
Nice one, it VERY hard to resist such a car isn't it !
Congrats to you and your wife on the other little arrival.Brian
TDV6 SE
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
