Member Since: 08 Mar 2006
Location: Hampshire
Posts: 957
Help - 12v Supply
Hi....
My car is in bits!!!...I have got hold of the supply to the 12v output and want to splice into it for my satnav...not being mechanically or electrically minded in the slightest....which is the pos and which is neg? Got 2 wires, one black the other purple and green???
Help please.....
23rd Sep 2006 3:07 pm
twincam escort
Member Since: 30 Oct 2005
Location: Midlands
Posts: 23
Using a simple test lamp or DVM if you have one, connect one end to an earth point (-ve) on your body and the other end to each wire in turn. If it lights or indicates 12V then that is the live or +ve. The other wire should remain at 0V or off.
Be aware that some supplies are only live when switched by the ignition key.
PS if using a dvm select dc volts!
23rd Sep 2006 4:15 pm
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
Where is this supply normally connected to? *normally* black is -ve...
Echo the comments above, use a test lamp or meter before commiting to any connections
23rd Sep 2006 5:28 pm
Buckingham
Member Since: 08 Mar 2006
Location: Hampshire
Posts: 957
I have taken the supply from the 12v supply to the left of the ashtray...
23rd Sep 2006 5:37 pm
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
Black is -ve, Purple/green is switched +ve at position 1, fuse is 34 in the CJB
23rd Sep 2006 5:52 pm
Buckingham
Member Since: 08 Mar 2006
Location: Hampshire
Posts: 957
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum