Member Since: 11 May 2006
Location: Copenhagen
Posts: 223
System check complete message gone
Hi
Had mine to the dealers on friday to get timer for the FBH fitted.
Over the weekend i have noticed that the "system check complete" does not appear secs after ignition. Im pretty sure i had it together with the bong before. Now i only have the bong - anyone else noticed something like this ?
Also engine got more diesel engine sound'ish and "diesel engine rattle" is louder - so maybe i got enhanced. But i wonder why as it was produced in July where the enhancement was allready out.
I had the s/w enhancement done last Friday. I cannot say if it was good or bad yet.
System Check Message still there and the bong.
I have a new little letter appearing in the driver's info display - "i>" when I select Sportshift. Don't know what it is telling me because the "i" doesn't do anything Ithought it was telling me to push the "i" on the indicator stork but it just cahnges then info display.
Chris2011 Discovery 4 (MY12) SDV6 HSE with General Grabber AT's, Traxide Aux Battery system, custom rear drawers and Autosafe half height cargo barrier
Gone - 2005 Discovery 3 TDV6 HSE
ARB Bull Bar, Warn 9.5XP Winch, IPF D/Lights, Cooper STT's, LR Raised Air Intake, Traxide aux battery system, custom drawers and half height Autosafe cargo barrier, Mitchell Bros 4x4 tow hitch
If you keep flicking through the Info Display, it will display that you are in CommandShift mode again for a few seconds.Dave
Disco Dreaming
18th Sep 2006 5:54 am
Barn1e D3 Decade
Member Since: 28 Aug 2006
Location: Mid-sussex
Posts: 2021
Chris
I posted a question about "i>" elsewhere and as a result, went and pressed the i on end of stalk. Just scrolled through options as normal, so I'm not sure what the "i>" is trying to tell me. I dont have the computer display the sits in the center of the dash, it displys in the main info panel in the dash. I dont remember it being there before.2005, TDV6 S, Auto, 190k miles, owned from new, V8 Brake Upgrade, Nancom Evo, RLD protector, BAS EGR blanking & Remap, separate ATF cooler, changing all the fluids ahead of time.
As far as I can tell, the i> indicates that there is a system message that can be displayed by pressing the 'i' button on the stalk. My D3 did this from day one, so maybe there is some mention of this in my manual. I'll have a look... 2006 Zermatt Silver TDV6 'SE' Auto, Mantec sump guard, Frontrunner roofrack, Lightforce 140s, split charge system and... a Jetboil.
Powered by
18th Sep 2006 8:10 am
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
if it is displayed permanently, it indicates a software mismatch, possibly due to some of the software applied in the enhancement didn't 'take' properly
Yep, it is even in my manual: the i> symbol indicates that there is a message to read by repeatedly pressing the 'i' button.
You can try this out by switching DSC off: the i> appears and after the 'DSC SWITCHED OFF' message disappears you can read it again by cycling through the screens with the 'i' button.
Don't know about the permanent i>, my software is apparently ok 2006 Zermatt Silver TDV6 'SE' Auto, Mantec sump guard, Frontrunner roofrack, Lightforce 140s, split charge system and... a Jetboil.
Powered by
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Ithought it was telling me to push the "i" on the indicator stork but it just cahnges then info display.
2006 Zermatt Silver TDV6 'SE' Auto, Mantec sump guard, Frontrunner roofrack, Lightforce 140s, split charge system and... a Jetboil.
