1 x Tough Tray Universal Laptop Holder c/w Angled Clamps (RAM-234-3)
1 x Round Base with 1.5" Ball (RAM-202A) - bolts onto underside of tray
1 x Double 1.5" Ball Long Socket Arm (RAM-201-D) - clamps onto Round Base Ball
But for extra height, and to allow a passenger to use the front left seat, you also want:
1 x Double 1.5" Ball Standard Socket Arm (RAM-201)
1 x Double 1.5" Ball Adapter (RAM-230)LRs are a fond memory, apart from the maintenance.
26th Feb 2011 12:04 pm
GSLRO
Member Since: 10 Sep 2008
Location: Sunderland
Posts: 1279
I ended up chopping Ray's Ball Off the seat mount, drilling a hole and fitting one of these http://www.ram-mount-uk.com/ram-207.htm as the metal ball was not getting enough grip for my taste! But has to get a pipe thread nut of a good size and drill through the nut and ball joint thread then insert a self tapping screw once nice and tight no problemo!
Ray did that bring a tear to your eye, bet you never felt a thing! Club N.E.R.D.s
26th Feb 2011 12:21 pm
AndrewS Tarquin of the Desert
Member Since: 06 May 2005
Location: Y...... because I can
Posts: 10442
All you had to do was add a bit of .75mm or 1mm rubber sheet to uncle Rays balls and it would have provided the extra thickness to grip. In the Beginning there was nothing, which exploded.
Not cheap, all in all around £200 - RAM do have an option for tablet style systems as well as powered docking stations, but I didn't look into these - the tray I went for means I can adjust it to suit different systems.LRs are a fond memory, apart from the maintenance.
26th Feb 2011 8:41 pm
devonchilliman
Member Since: 03 Nov 2008
Location: Devon
Posts: 5224
That's was one of the reasons it's taken me until now to go for it LRs are a fond memory, apart from the maintenance.
26th Feb 2011 10:07 pm
mick
Member Since: 21 Jan 2007
Location: Yorkshire
Posts: 2049
They have gone up a bit since i got mine
26th Feb 2011 10:17 pm
GSLRO
Member Since: 10 Sep 2008
Location: Sunderland
Posts: 1279
AndrewS wrote:
All you had to do was add a bit of .75mm or 1mm rubber sheet to uncle Rays balls and it would have provided the extra thickness to grip.
True and no doubt would have done the job just as well, but the extra girth of the pipe thread made a difference to the 'flexing' of the mount. Plus I didn't think Ray was into PVC at the time.
Click image to enlarge
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated Club N.E.R.D.s
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
and some RAM Mount components (Part-numbers at end of this post):
,wouldn't mind doing that myself,but for an IPad 
