DG
Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50934
|
Came across this front mounted towing kit for the D3 ....caravaners might find it useful for easing van placement on sites or drives ??
http://www.western-towing.co.uk/acatalog/L...wbars.html 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
|
31st Aug 2006 7:48 pm |
|
|
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
|
now why were you looking at that? - unless you're planning hijacking a trailer full of err... friends
|
31st Aug 2006 7:50 pm |
|
|
DG
Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50934
|
MMmmm....now there's a plan
Also Witters have an aftermarket detachable in development ...should be out soon ....mucho cheapo I hope. 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
|
31st Aug 2006 7:54 pm |
|
|
simon
Member Since: 11 Jan 2005
Location: Shropshire
Posts: 18296
|
dickgriff wrote:MMmmm....now there's a plan
Also Witters have an aftermarket detachable in development ...should be out soon ....mucho cheapo I hope.
not less than £150 I bet fleabay in the box, never used and hanging off the back of mine now ?
-s
|
31st Aug 2006 8:37 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6233
|
I am thinking of making one of these, has anybody seen one fitted and used.
Just wondering what at the front its mounted to chassis or a cross member.
Flack
|
15th Sep 2006 9:22 pm |
|
|
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
|
has to be the end of the chassis rail - there is no front crossmember
|
15th Sep 2006 9:31 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6233
|
Just made myself a Push Bar and mounted it to the drivers side of the chassis I made it in two pieces with a fixed part for the mount.
Cost £12.00 in total. Its a bit longer than I was expecting but with a decent mounting point being so far back on the front it had to be.
Had test today and works perfect.
See pictures in my gallery.
Flack.
|
24th Sep 2006 8:16 pm |
|
|