Glymmer_Man
Member Since: 08 Mar 2006
Location: Sunny Downtown Sydney. I wish it were raining.
Posts: 319
  
|
I finally received my Dog Guard! Hooray! 
Have any of you guys had trouble getting the floor mounted load retention hooks to stay straight when tightening the hex head screws?
If so, how did you over come it, or did you just leave them? Dave
Disco Dreaming
|
 14th Aug 2006 1:36 am |
|
|
|
|
christyler
Member Since: 31 Dec 2005
Location: Cork, Ireland
Posts: 1168
|
Yes, know what you mean, The problem is that the holes in the flat brackets that come with the guard are to small for the bottom flange in the hook to go through. You need to drill them out so that it goes through the hole, you will notice that they fit flush with the floor again then. CLUB "Ah Shor it'll be grand"
First D3 in the World with a Hydraulic Winch.
2006 Disco 3 TDV6 S Auto,
Diff Locks, Turbochipped, Raised Air Intake, 220volts Onboard, Onboard Compressor, Large Bore Exahust, Underbody Protection, One or two Other Mods as well.
Other toys include, Argo Avenger 8x8, Tatra 6x6 Motorhome (Being Built)
|
| 14th Aug 2006 9:41 am |
|
|
Glymmer_Man
Member Since: 08 Mar 2006
Location: Sunny Downtown Sydney. I wish it were raining.
Posts: 319
|
LHD wrote:is this the LR version or the Paddock version?
LR Version, full height.
It was such a trial getting it.
Happy now though, even if the shipping cost more than the unit.  Dave
Disco Dreaming
|
| 14th Aug 2006 9:42 pm |
|
|
