Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO3.CO.UK > Technical (D3)

Remove glow plug near HPFP
Post Reply  Down to end
Page 1 of 1
Overlander.sbat
 


Member Since: 30 Jan 2023
Location: Sweden
Posts: 2
Remove glow plug near HPFP

Hello.

Is it really necessary to remove a bit of material from the HPFP in order to get the last glow plug out (rear one on the LH cylinder bank)? Is it not possible to undo the bolts on the front of the pump close to the crankcase vent oil separator and wiggle the pump about or does that screw up the adjustment somehow (or risk the belt jumping?)?

The manual simply states "remove the glow plugs", but that last one... I mean it is already loosened, so I am lucky so far but isn't there another way than to remove material from the pump housing?

Click image to enlarge


Click image to enlarge
  
Post #236721222nd Apr 2024 6:01 pm
View user's profile Send private message View poster's gallery Reply with quote
CDS
Site Sponsor 


Member Since: 12 Oct 2009
Location: All over the UK!
Posts: 3323

United Kingdom 2008 Discovery 3 TDV6 HSE Auto Tangiers OrangeDiscovery 3

It can be persuaded to come out without removing anything else, it’s tight, like really tight, but it will come out…it may be a little bent by the time you have it out. But it will come out Thumbs Up 
Discovery 3/4 & RRS keys cut and programmed at your home or work
Apple CarPlay/ Android Auto retro fit - see it here
BAS Remaps/ EGR Blanking
Software updates/ enabling
Mobile Servicing & Repairs  
Post #236725422nd Apr 2024 11:19 pm
View user's profile Send private message View poster's gallery Reply with quote
Overlander.sbat
 


Member Since: 30 Jan 2023
Location: Sweden
Posts: 2

A little bent... No bueno.

How do I get it out without running the risk of dropping a part down into the cylinder head and most of all: if it only comes out "a little bent", how do I get in the new one without bending it (=not an option)?  
Post #236734623rd Apr 2024 7:27 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site