I have purchased a Cargo Barrier - but sadly some of the fittings are missing.
I am not not quite sure how to describe them but basically two each of:-
The bolt which runs within the spacer tube
The flat washer & lock washer which go on that bolt
The only critical item is the bolt - once I have that or its precise specification I can easily get the missing washers.
Does anyone please have one, or better still two of these bolts?
If not would some kind person who has a cargo barrier post the specification of the bolt - length, pitch etc...
To help I have identified the missing bits below:-
Click image to enlarge
My first thought was TLO - but he tells me that the fittings are only available as a kit - price £52.19 !
NJSSAm I Gammon or Woke ? - I neither know nor care.
2016 Discovery 4 Landmark
2011 Mercedes Benz SL350 (R230)
1973 MG B GT V8 - 3.9L John Eales engine, 5 speed R380 gearbox, since 1975.
1959 MGA roadster - 1.9L Peter Burgess Engine - 5 speed gearbox
Past LRs - Multiple FFRs, Discos & a Series I - some petrol, some diesel,
none Electric or H2 fuel cell - yet.
There are 10 types of people in this world: Those who understand binary, and those who don’t.
I have my kit in the garage - will measure the bolts ...
Threaded section of bolts is 90mm, I'm pretty sure it's M5 thread,. but if you remove the short bolts from where these new ones need to go, that'll give you a sample to take with you
Last edited by MrH on 22nd Jun 2010 6:48 pm. Edited 1 time in total
22nd Jun 2010 6:43 pm
neil
Member Since: 28 May 2009
Location: Wiltshire / Gloucestershire border
Posts: 164
I use mine without the bolts! Easier to put in and out and is still secure with no movement
22nd Jun 2010 6:47 pm
countrywide
Member Since: 16 Sep 2007
Location: UK
Posts: 6019
Pop in Nigel and you can measure mine. Should be easy enough to get and a bit of pipe for the spacing.
22nd Jun 2010 7:00 pm
Moonie
Member Since: 28 Feb 2010
Location: Whitby North Yorkshire
Posts: 178
If you can wait until the weekend I will have a look in the garage my HSE came with the brackets left in it if I can find them you can have them. Maybe a small donation to the HFH fund ?
Obviously if Moonie can provide the missing bits that would be best - so I'll wait until after the weekend before taking further action.
Regards
NigelAm I Gammon or Woke ? - I neither know nor care.
2016 Discovery 4 Landmark
2011 Mercedes Benz SL350 (R230)
1973 MG B GT V8 - 3.9L John Eales engine, 5 speed R380 gearbox, since 1975.
1959 MGA roadster - 1.9L Peter Burgess Engine - 5 speed gearbox
Past LRs - Multiple FFRs, Discos & a Series I - some petrol, some diesel,
none Electric or H2 fuel cell - yet.
There are 10 types of people in this world: Those who understand binary, and those who don’t.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum