mikehigham
Member Since: 07 Mar 2005
Location: Surrey/Glos
Posts: 7
|
I might be being stupid here, but this afternoon I was programming the memory buttons for the seat adjustments on my HSE. I inserted both sets of keys and adjusted and stored in two different mem locations for myself and my wife. When I then came to get in the car the seat did not adjust for me and I had to manually press the mem button. I thought the car did this as you used different key fob?
Help
TIA
Mike
|
 11th Jun 2005 6:45 pm |
|
|
Gareth
Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26774
|
I have this also. Make sure the Lazy Entry is switched on in the SETTING menu (press the end of the left hand stalk with the ignition on)
Mine seems to need a second press of the unlock button to activate the lazy entry function though. I don't know if this is intentional.
I am also not convinced that it sets itself to the exact memory postion everytime either, I seem to have to adjust the backrest each time.
|
| 11th Jun 2005 9:50 pm |
|
|
