Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
FCR offer @ Driffield LRO Spring Adventure May 8th-9th 2010
Im unsure of the correct section for this so ive posted here with hope of it being correct
As many of you know i spend my summers traveling the country to all of the landrover shows, the first real show of the season is Driffield inonly a few more days
As usual i will have a range of products available from EGR Blanking kits, BAS remap interfaces, RRS, D3/4 Rear LED lights, D4 Xenon head light upgrades, D3 to D4 front end conversion parts, Silicone hoses and more.
This year we have added to the product list even more goodies as seen below.
We have available in stock the Blackbox-Soloutions Faultmate FCR & the CAN-Mate SRT both available for the D3, D4, RRS, FFRR & Freelander 2
At the show with stock available you will save the money on the shipping cost making it an instant purchase item available on the day
Im currently working out the final prices for all the show products so ill upate this post asap.
Please if anyone is interested in purchasing one from me at the show try and send me a PM or email with your requirements first to i can be aware of the numbers interested.
Some info below for the Faultmate FCR.
The Faultmate FCR is designed and manufactured specifically for Reading and Clearing all possible Fault Codes on every system with built-in self diagnostic capability on board each Land Rover model it covers.
Provided and priced as a personal use item for individual vehicle owners, the Faultmate FCR will lock itself to the VIN of the first vehicle it is used on, however, this feature also acts as a theft deterrent, because there is little point anyone stealing the unit, as once used on a vehicle, as it will not work with any other vehicle.
Each Kit comes complete with a FCR Unit, an OBD/Interface Lead, a USB Cable and User Guide - everything you need to start Reading and Clearing your Fault Codes.
Below is some info for the CAN-Mate SRT taken from the BBS web site.
The CAN-Mate SRT allows you to reset the Service Interval Indicator in your vehicle. This is a requirement on the Land Rover service check sheet that needs to be completed on every service, if your Warranty/Service History is to be kept current.
When you have finished servicing your vehicle, without the CAN-Mate SRT you will still have to go a Main Dealer or an independent specialist who has equipment like our Faultmate MSV-2 to have them reset the Service Interval Indicator for you. Of course, they will want some of your money that you have saved by doing your own service.
Alternately, you may be a person who prefers not to get their hands dirty but also doesn’t want to pay exorbitant Main Dealer prices. This is especially true when you have a small garage down the road that is more than capable of doing basic servicing, but doesn’t have access to full diagnostic equipment needed to reset the Service Interval Indicator. Therefore you can hand him your CAN-Mate SRT to allow him to complete your service to full Land Rover Specifications.
The CAN-Mate is a tool that is required for the following vehicles only:
- Discovery 3/LR3
- Range Rover Sport
- Freelander 2
- Range Rover L322 - up to MY2009 (Jaguar engine fitted only, not required for BMW)
To reset your service interval, select one the sixteen possible service intervals on the CAN-Mate SRT - a table is in the User Guide. Then simply plug it into the OBD Connector and it resets the Service Interval Indicator for you. No fuss, no palaver and more importantly, no garage fees just for two minutes work.
With intelligent use of a high intensity flashing LED, the CAN-Mate SRT will inform the user that the Service Interval reminder has been reset, or if there has been a communication error - in which case it will then also tell you the cause of that error.
Pete
.
Last edited by bellautos on 30th Apr 2010 10:54 pm. Edited 1 time in total
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
Id love to , but the MSV2 mapping is only available via the BBS shop as a BBS product produced by me so on this occasion no im afraid discounts on this are beyond my control.
However its not all bad news, i can lend you my Wifi so you can place an order over the web while at the show and ill chuck you in a free BAS Key ring and BAS Mug
Pete
Last edited by bellautos on 27th Apr 2010 10:43 pm. Edited 5 times in total
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
It was a mug or a Bsmug
For information to the forum members, the FCR will be semi limited stock so you are interested in collecting from the show please can you PM email or call before the show so i can save you one before he manic show rush.
As said i will have the CAN-mate SRT tool also but this will be in limited stock.
Demo's of the FCR or the Faultmate MSV2 working on the D3 and D4 are available on request at the show.
Pete
.
28th Apr 2010 9:19 pm
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
Ive just noticed i didnt post back with the prices
The Faultmate FCR collected from the show for any of the following cars is only 220gbp all in.
- Discovery 3/LR3
- Range Rover Sport
- Freelander 2
The CAN-Mate is a tool that is for the following vehicles only: is 60gbp all in.
- Discovery 3/LR3
- Range Rover Sport
- Freelander 2
- Range Rover L322 - up to MY2009
Both of these tools are at a bargin price as you wont have the shipping costs to pay on collection from the show.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
