Member Since: 05 Jan 2010
Location: Warrington
Posts: 4
Side Mouldings with Bright inserts - good idea - easy to fit
Hi Folks,
Disco 4 just landed thanks to help from this site sourcing a good deal.
I wish to preserve my door panels from damage in car parks etc. and need to know if on the mouldings that have bright inserts whether the inserts stand proud (i.e. they too would get damaged when a car doors hits) or in fact they are in-set.
Basically wonderring if bright inserts on the mouldings defeat the purpose as they too could get damaged.
Also are these easy enought to fit yourselves?
Thanks in advance, J
3rd Mar 2010 8:31 pm
ad15
Member Since: 14 Dec 2008
Location: up that tree
Posts: 4866
Quote:
I wish to preserve my door panels from damage in car parks
2 options.
1. park at the quiet end of the carpark.
2. make sure d4 is caked in mud when you go to supermarket, you'll have space both sides when you come out..
Why not do what I do,either park over two ajoining spaces or get a set of side steps and park with the suspension set at its highest setting,whereby anyone opening their door into your car gets a nice ding courtesy of the side step 2007 TDV6 XS Auto.
Colour coded door handles
Colour coded tailgate handle
Colour coded wheel arches
Clear LR repeaters
LR sidesteps
110 Mudflaps
3rd Mar 2010 9:06 pm
ad15
Member Since: 14 Dec 2008
Location: up that tree
Posts: 4866
becuase in some carparks that will get you a ticket/ clamped...... at the very least abuse from others...
Bright insert are set below the surface.
"I know that you believe that you understood what you think I said, but I am not sure you realize that what you read is not what I meant"
... get a set of side steps and park with the suspension set at its highest setting,whereby anyone opening their door into your car gets a nice ding courtesy of the side step
Alas, this does not work when adjacent muppet opens his (or her) rear door onto yours.Time flies like an arrow; fruit flies like a banana
Member Since: 01 Aug 2005
Location: Cornwall
Posts: 2578
Re: Side Mouldings with Bright inserts - good idea - easy to
jwalkington wrote:
...Also are these easy enought to fit yourselves?...
Needs very careful measurement, and a very warm day - unless you don't mind them peeling off again.
They only offer a limited amount of protection, as the mid height of the door remains vulnerable.Long succession of Disco's since 2001...
SIII Lightweight - neglected & rusting. Bulkhead, A panels, vent panel & outriggers now disintegrated - Next years project!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum