I am trying to fit an adjustable height to my D3 and am having some problems. I have taking the bolt out of the chassis rail to take the support, but the bracket that holds some piece of big swinging metal has jumped out of place and I carn't put the bolt back in. How are these brackets realined, do I take the bumper off? Please help.DISCO 4 HSE, PEUGEOT 206 HDI VAN, FERGUSSION T20 TVO.
3rd Mar 2010 11:45 am
Dave T
Member Since: 03 Jul 2009
Location: Glasgow
Posts: 6903
Same happened to me. As far as I remember mine only moved a few mm but enough to cause misalignment. I think, (can't look as the car is away for MOT) I just used a lever to get everything back in line. Maybe use a large screwdriver through the holes to assist in pulling it back down. What I do remember was a lot of sweating and swearing before it went in. Good luck, just keep perservering. Joined the BMWX5 45e group
1994 Defender 90
2015 RRS Corris Grey/Black roof
2016 D4 Graphite Santorini Black
2012 D4 XS Orkney Grey
2005 D3 S Maya Gold
Convoy for Heroes 2011
3rd Mar 2010 12:56 pm
cobblers
Member Since: 06 Dec 2008
Location: Chester
Posts: 175
Same for me as well, as I recall I also needed to re-align using a screwdriver or something similar. I also recall not tightening either side up untill all bolts were in place. It was a job that should be dead simple, and is once its done, but caused quite a bit of frustration.
I definately didn't need to take the bumper off though.
3rd Mar 2010 1:13 pm
al cope
Member Since: 08 Nov 2005
Location: Oldbury, WM
Posts: 10330
Hate to be the bearer of late news, but I dont think you needed to take that bolt out, as its a funny sort of bolt within a bolt. Sorry
sounds like a screwdriver or lever to realign is whats required.
AlVolvo XC90 B5 Plus Dark
Gone - MY18 D5 HSE - Corris on 22's with Black Pack
Now gone - MY16 D4 SE Tech, Loire Blue, Almond Leather, Privacy, plus some other goodies.
Old - MY12 D4 SDV6 XS Auto - Ipanema Sand with Almond Leather - Plus other niceties, and D4.com sticker
Older - D3 TDV6 XS Auto - Lugano Teal with Almond Leather, 20" Stormers, Shiny Tailpipes, DVD/TV - and obligatory D3 sticker
Ancient - D3 TDV6 S - Tonga with Ebony, 20" Stormers, satnav & DVD
3rd Mar 2010 1:29 pm
cobblers
Member Since: 06 Dec 2008
Location: Chester
Posts: 175
AFAIK the bolt through the chassis part needed to be removed in order to put in a longer one which takes the new tow bar spar. (as I remember). Lining up the part inside the chasssis to put the new bolt in was the tough bit on mine.
3rd Mar 2010 1:55 pm
al cope
Member Since: 08 Nov 2005
Location: Oldbury, WM
Posts: 10330
When I took mine off, I thought it was the "inner" one I removed to release the side bars (spars), with the bigger one staying in the chassis - different again on the 09 model when it came to refitting
AlVolvo XC90 B5 Plus Dark
Gone - MY18 D5 HSE - Corris on 22's with Black Pack
Now gone - MY16 D4 SE Tech, Loire Blue, Almond Leather, Privacy, plus some other goodies.
Old - MY12 D4 SDV6 XS Auto - Ipanema Sand with Almond Leather - Plus other niceties, and D4.com sticker
Older - D3 TDV6 XS Auto - Lugano Teal with Almond Leather, 20" Stormers, Shiny Tailpipes, DVD/TV - and obligatory D3 sticker
Ancient - D3 TDV6 S - Tonga with Ebony, 20" Stormers, satnav & DVD
3rd Mar 2010 2:27 pm
Chicken Duck
Member Since: 11 Nov 2009
Location: Italy
Posts: 1387
Here is pic of said bolt the thick part is in the chassis
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum