Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO3.CO.UK > Maintenance & Mods (D3)

Genuine Front PDC Retrofit
Post Reply  Down to end
Page 1 of 1
Alan G
 


Member Since: 15 Oct 2008
Location: Lanarkshire
Posts: 1372

Scotland 2008 Discovery 3 TDV6 XS Auto Zermatt SilverDiscovery 3
Genuine Front PDC Retrofit

I have ordered the bumper kit off of TLO and seeing as it has 4 exposed openings for PDC units, i was going to get them. This is for a 54 plate Nov 2004 TDV6 S. I have had the headlamp out and the two plugs are there for the Fog lamps and Parking sensors.

Speaking to a friend and as previously mentioned, Master Tech of local LR Franchise, he reckoned that maybe another parking ECU would be required, as when they order them, they ask if it's a 4 or 8 sensor ECU.

So, for those who ahve fitted the front PDC already, what did you do, did they just plug in and work srtaight off?

Can anyone clarify if it's just a matter of plug and play with both PDC & Fog lamps or do they require to be enabled?

Thanks. ATB

Alan


http://www.youtube.com/user/Bonzo676767#p/u  
Post #58994725th Jan 2010 9:08 pm
View user's profile Send private message View poster's gallery Reply with quote
Slimer
Site Moderator 


Member Since: 06 Jan 2005
Location: Last Exit to Nowhere
Posts: 16295

United Kingdom 

As long as you have the rear PDC no additional ECU's are required, you'll have to get them enabled though... Autologic or Faultmate

Fogs will work with no software changes but you'll need to update the headlamp switch The End 

Last edited by Slimer on 25th Jan 2010 9:15 pm. Edited 1 time in total 
Post #58995025th Jan 2010 9:13 pm
View user's profile Send private message View poster's gallery Reply with quote
PaulP
 


Member Since: 04 May 2007
Location: Barcelona
Posts: 4317

Spain 2006 Discovery 3 TDV6 SE Auto Buckingham BlueDiscovery 3

If you have rear PDC and the front PDC connector behind the right-hand headlight, then it should be straight-forward.

You will, however, need to get the front PDC sensors activated for them to work.

Activation needs a CCF edit so that means Faultmate, Autologic or LR IDS at your local dealer. Thumbs Up 2006 Discovery 3 TDV6 SE Auto Buckingham Blue
2007 Golf GT DSG  
Post #58995125th Jan 2010 9:14 pm
View user's profile Send private message View poster's gallery Reply with quote
Alan G
 


Member Since: 15 Oct 2008
Location: Lanarkshire
Posts: 1372

Scotland 2008 Discovery 3 TDV6 XS Auto Zermatt SilverDiscovery 3

Thanks guy's, this is what i wanted to hear. Bow down

Yes, original S spec came with rear PDC so not a problem and i'll either see Wigg's next time he's up in Jockland or i may have another avenue to get them enabled. Thumbs Up ATB

Alan


http://www.youtube.com/user/Bonzo676767#p/u  
Post #58997025th Jan 2010 9:28 pm
View user's profile Send private message View poster's gallery Reply with quote
Ent
 


Member Since: 12 Oct 2007
Location: In the cack
Posts: 6485

Iraq 2011 Discovery 4 3.0 SDV6 XS Auto Fuji WhiteDiscovery 4

What if you have rear pdc but don't have the two plugs behind the headlamp?? Can it still be done? Club Exped trailer
Club Timed Climate
Club Flappy paddle steering wheel
Club 300bhp
Club Prospeed test pilot/lab rat
Club National Luna Stella conditioner  
Post #59003325th Jan 2010 10:07 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site