Member Since: 08 Jan 2009
Location: Coventry
Posts: 40
light switch
hi all
hope someone on here will be able to help with my problem.
i need to take out my light switch (the main switch; headlights,side lights}
looking at the plastic panel i can see no way of removing and dont wont
to break any bits,so would be grateful for any advice
thanks.
mick.old git
25th Oct 2009 3:42 pm
SN
Member Since: 03 Jan 2006
Location: Romiley
Posts: 13710
use the search facility - there are examples/instructions on here - from memory you need to pull the whole panel off from around the vent - its one of those pull hard from the bottom type movements - then you can get at the switch and its panel attached to the back of the bigger pieceSteve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history)
25th Oct 2009 3:52 pm
DN D3 Decade
Member Since: 24 Jun 2006
Location: W.London.
Posts: 2319
The whole piece from below the light switch up to and including the air vent above comes out. Grab hold at the bottom and pull hard and swing it upwards, note there are a couple of locating tabs at the top which will only come out when the whole thing has been tilted upwards .Disconnect wiring plug as soon as you can get to it,before tilting it fully up.. The light sw is screwed to this from behind with torx screws.
25th Oct 2009 3:55 pm
MacLeod 313
Member Since: 18 Apr 2008
Location: away
Posts: 10723
Here is a pic to help you, wrong side BUT you can work it out.
NOTE the hooks at the top, and the clips at the bottom
25th Oct 2009 4:28 pm
mike.oneill
Member Since: 08 Jan 2009
Location: Coventry
Posts: 40
thanks sn dn and macleod
job now done
mick.old git
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum