mario
Member Since: 17 Oct 2009
Location: Ruimsig
Posts: 1
![](templates/vbnew/images/spacer.gif)
![2007 Discovery 3 TDV6 HSE Auto Stornoway Grey 2007 Discovery 3 TDV6 HSE Auto Stornoway Grey](../images/veh/stornoway_grey.gif)
|
How to remove a disco 3 rear bumper to adjust the pdc. Go Beyond
|
17th Oct 2009 6:27 am |
|
|
Tawny Owl
Member Since: 22 Oct 2008
Location: Here and there
Posts: 1645
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 Base 7 Seat Auto Java Black 2005 Discovery 3 TDV6 Base 7 Seat Auto Java Black](../images/veh/java_black.gif)
|
mario
There is pdf some where but can't find it .
Basically ,
Remove mudflaps (3 screws)
Remove both rear light units (2 screws on each unit) and pull light unit out and unplug
Remove 1 x bolt each side (top bolt where the light unit would have hidden it)
Remove 4 x screws underneath the bumper cover
Remove the 4 clips on the inner edge of the bumper cover , tailgate cover to be lifted to see them.
Pull out the arches (on poppers) to access bumper screw behind
Pull out bumper where it meets the arches and then it should be ready to slide off.
Pretty sure that's all , very easy job though
|
17th Oct 2009 10:01 am |
|
|