Member Since: 08 Mar 2009
Location: Lancashire
Posts: 204
Parking Sensor
Hi Guys
Parking sensor playing up I think. The rear ones work ok but the front one is not indicating that it works, i.e no beeping noise when near any object. Did work when I first picked up the car.
Can anyone help.
ThanksDon't be blinkered vision, see the world in colour.
6th Oct 2009 10:29 am
adam
Member Since: 20 Sep 2005
Location: Home and Happy
Posts: 6917
Have you cleaned them?
6th Oct 2009 10:40 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Does anything come up on the LCD display in the dash ?
Some thing like "front PDC inoperative "?G4 Gone ...but not forgotten
6th Oct 2009 10:47 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Just thinking you have an "S " model ..are you sure you have front PDC ..your picture in your gallery shows a vehicle without them G4 Gone ...but not forgotten
6th Oct 2009 10:49 am
NIDisco3
Member Since: 29 Apr 2005
Location: Derry City
Posts: 610
How do you get access to clean them??
Is it a bumper off job
6th Oct 2009 12:11 pm
adam
Member Since: 20 Sep 2005
Location: Home and Happy
Posts: 6917
Just wash them gently - no need to remove (powerwashes can wreck them) - sometimes works
Mine worked fine until I powerwashed them - then intermittent - had to have 2 replaced last week
6th Oct 2009 12:24 pm
pa28pilot
Member Since: 08 Mar 2009
Location: Lancashire
Posts: 204
Front Parking Censors
Are there suppose to have the same censors as the back on the front bumper as I am dead sure they worked when I first bought the car. When I put the car in reverse the button on the dash board lights up and turns off but not sure what position the switch should be in. Could do with meeting up with a load of guys with disco 3 and consult on each others diy probs on disco 3.Don't be blinkered vision, see the world in colour.
6th Oct 2009 2:49 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
If thats your car in your gallery then you have no sensors .
yes they look exactly the same as the rears . The function is automatic ( providing you have the latest software enhancements ) ..you put it in reverse start moving ..parking sensors work ( light on button comes on ) ...take it out of reverse ..parking sensors stop ..(light on button goes out ) ..if the light is blinking then you have a problem .G4 Gone ...but not forgotten
6th Oct 2009 2:56 pm
pa28pilot
Member Since: 08 Mar 2009
Location: Lancashire
Posts: 204
Blinking sensors
Yes thanks alot guys I will check again this weekend.Don't be blinkered vision, see the world in colour.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum