gilford84
Member Since: 28 Sep 2009
Location: Anglesey
Posts: 4
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 S Manual Zambezi Silver 2005 Discovery 3 TDV6 S Manual Zambezi Silver](../images/veh/zambezi_silver.gif)
|
I have a Discovery 3 on a 55 plate, and have an issue with the rear driver side brake binding. it only started a few days ago, when i noticed a burning smell coming from the rear brakes, as well as the wheel itself getting really hot. Also when driving in the morning, there is a noise coming from the same area, which im not sure is connected to the same problem.
Do the disco 3 have any issues with rear brakes binding? or can it be more serious which coulld be problems with the handbrake system?
Thanks for any help
|
28th Sep 2009 6:42 pm |
|
|
MacLeod 313
Member Since: 18 Apr 2008
Location: away
Posts: 10723
![](templates/vbnew/images/spacer.gif)
![2006 Discovery 3 TDV6 HSE Auto Zambezi Silver 2006 Discovery 3 TDV6 HSE Auto Zambezi Silver](../images/veh/zambezi_silver.gif)
|
Hi there Gilford, welcome aboard
Now it could be one of two things. The 1st being the EPB module not releasing the EPB properly, and/or the the EPB shoes need adjusting.
Or
Like me I had the module changed cos this happened, only for a few months later the caliper stuck, binding the pads. This happens cos the pads are wearing out and they seem to seize. I would try the pads 1st, easy job to change and the pads are a NEW design to eliminate water ingress and squeaking.
|
28th Sep 2009 6:46 pm |
|
|