Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO3.CO.UK > Maintenance & Mods (D3)

Fitting front/rear lamp guards?
Post Reply  Down to end
Page 1 of 1
evisu140
 


Member Since: 15 Jun 2009
Location: Scottish Borders
Posts: 21

United Kingdom 2009 Discovery 3 TDV6 GS Auto Santorini BlackDiscovery 3
Fitting front/rear lamp guards?

Hi,

Are front/rear lamp guards easy enough to fit? Do I need to drill any of the body work or do they fit to existing screws etc. Any help would be grate, I'm considering buying a set for my D3.....

Cheers,

Jason  
Post #48228916th Jun 2009 10:21 am
View user's profile Send private message View poster's gallery Reply with quote
SN
 


Member Since: 03 Jan 2006
Location: Romiley
Posts: 13710

Front ones are a no-brainer - pop the headlamps out, stick plugs into ready and waiting holes, attach hidden bracket - put headlamp back in and screw down outer guard - job done.

Back ones need drilling of bodywork BEHIND lamp units - instructions say you should use Rivnuts into 7mm hole (ISTR) but I never had the rivnuts on mine so drilled 4mm holes, gunked up with a bit of mastic and self tapped the screws in. Just need to follow the old 'measure twice, cutdrill once' adage to get them straight Steve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history)   
Post #48229116th Jun 2009 10:31 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
PaulP
 


Member Since: 04 May 2007
Location: Barcelona
Posts: 4317

Spain 2006 Discovery 3 TDV6 SE Auto Buckingham BlueDiscovery 3

Front guards fit using existing holes etc - no need for drilling.

Rear guards need a couple of holes drilling, but are behind the rear lights and would therefore be invisible if you take them off at some point.

Fitting instructions are available here:

http://www.ownerinfo.landrover.com/extfree2viewlrprod/index.jsp 2006 Discovery 3 TDV6 SE Auto Buckingham Blue
2007 Golf GT DSG  
Post #48229216th Jun 2009 10:31 am
View user's profile Send private message View poster's gallery Reply with quote
evisu140
 


Member Since: 15 Jun 2009
Location: Scottish Borders
Posts: 21

United Kingdom 2009 Discovery 3 TDV6 GS Auto Santorini BlackDiscovery 3
Awesome link, thanks for the help guys.......

Very Happy  
Post #48229916th Jun 2009 10:50 am
View user's profile Send private message View poster's gallery Reply with quote
Steve H
 


Member Since: 14 Apr 2008
Location: Lancashire
Posts: 98

England 2012 Discovery 4 3.0 SDV6 XS Auto Orkney GreyDiscovery 4

Had these guards on my GS and was a bit concerned about the drilled holes at the back. Self tappers and unprotected steel didn't seem a good idea on a car designed to run in mud and water so I kept them coated in grease as far as possible. One thing to watch for is the positioing of the rear guard brackets. when I inspected the car before I bought it (it had been a demo car) I found that the inner brackets had been rubbing on the edge of the rear glass and had worn a groove in it. The stealer polished the edge of the glass smooth again but failed to see that spacers were needed to align the bracket correctly. I had no trouble after I made up small small spacers to fit behind the outer brackets. D4 SDV6 XS Orkney Grey  
Post #48232916th Jun 2009 12:04 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site