I have steps fitted but plan to remove these and fit tubes. Before I go removing do you know if bolts from steps will suffice? Also where do the brackets go as its not very apparent ? yep no instructions ...
Thanks
Googsy
2008 HSE TDV8
Beauty is in the eye of the beer holder...
Last edited by Googsy on 14th Jun 2009 2:50 pm. Edited 1 time in total
14th Jun 2009 2:42 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73134
when I had side tubes, just used standard bolts, m16 from memory and used 17mm socket, much easier to remove than Allan key bolts!
Cannot see any problem with the bolts as they are all m8 you only need m8X20mmHome of RLD Hidden winch mounts Spare wheel Locks Trailer Body Fabrication ray@rld-tech.co.uk D3/4 sump plates MY 14 sump plates and the Discovery Sport wheel protectors Discovery 5 wheel locks
more Helsport tents and other things for camping Law of Mechanical Repair:
"After your hands are coated with grease, your nose will begin to itch and you'll have to pee!"
m16 DSL to big same as Rock sliders m8 x20 mm longHome of RLD Hidden winch mounts Spare wheel Locks Trailer Body Fabrication ray@rld-tech.co.uk D3/4 sump plates MY 14 sump plates and the Discovery Sport wheel protectors Discovery 5 wheel locks
more Helsport tents and other things for camping Law of Mechanical Repair:
"After your hands are coated with grease, your nose will begin to itch and you'll have to pee!"
8.8 gradeHome of RLD Hidden winch mounts Spare wheel Locks Trailer Body Fabrication ray@rld-tech.co.uk D3/4 sump plates MY 14 sump plates and the Discovery Sport wheel protectors Discovery 5 wheel locks
more Helsport tents and other things for camping Law of Mechanical Repair:
"After your hands are coated with grease, your nose will begin to itch and you'll have to pee!"
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum