Member Since: 24 Dec 2009
Location: OLNEY
Posts: 42
disc and pads
Good Morning
I need new pads & discs on my 05 Disco 3 - any advice on changing both. Is it something I can do myself as I have always maintained and serviced other vehicles
Regards
Derek (DPJDISCO)
19th Jul 2010 8:25 am
The Transformer
Member Since: 22 Jan 2010
Location: Leicestershire
Posts: 1791
Check out Bodsy's brake bible, should make life very easy
Member Since: 31 Dec 2008
Location: Its never Dull in Hull
Posts: 280
Front are straight forward , the rears are more difficult due to the way you need to set up the brake shoes for the epb,
I do have the tech info but you will need to give me your e-mail address so i can send.
Hope this helps 'Just because you're breathing doesn't mean you're alive'
Buckingham blue, Webast timer/remote, AT2s, Black & Silver ovals ,
Privacy Glass , Drilled and Groved Discs , Xenons, Rear LED's , Light Guards,Hawkeye diagnostic unit.
TL1000R--XR600R--
19th Jul 2010 9:46 am
TallPaul
Member Since: 03 Jan 2008
Location: Near Reading
Posts: 1214
I re-tensioned the handbrake shoes using Bodsy's guide last weekend, was pretty easy, if you can change discs and pads can't see it causing an issue for you.
19th Jul 2010 2:50 pm
CMG
Member Since: 12 Jul 2010
Location: USA
Posts: 956
Can't comment on DIY, as I found someone do to mine for $50.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum