RMB
Member Since: 20 Mar 2007
Location: Scotland
Posts: 260
|
Slight problem Fella’s
My auto gear box losses drive. Having to pull lever bark hard to get it into drive, then the slightest touch of gear lever losses the drive on dash & also no drive to engine, resulting in the engine revving madly.
Also somtimes it slips out of drive with out any touch at all.
Any ideas guys
Thanks Rab.
|
14th Feb 2009 8:07 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
Sounds like the gear selector rod (could be called x y selecter I think) could also be the m8 bolt loose. Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
14th Feb 2009 8:19 pm |
|
|
RMB
Member Since: 20 Mar 2007
Location: Scotland
Posts: 260
|
Thanks bodsy
Could tell me WHERE the M8 bolt is, roughly.
I try to stay out of engine bay.
|
14th Feb 2009 8:32 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
I THINK it's attached to the gearbox side underneath but on side of gb. There's some other more detailed posts if you search for gear selector Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
14th Feb 2009 10:14 pm |
|
|
RMB
Member Since: 20 Mar 2007
Location: Scotland
Posts: 260
|
Thanks bodsy
i try that
|
14th Feb 2009 11:24 pm |
|
|