Member Since: 31 Dec 2005
Location: Cork, Ireland
Posts: 1168
Wheel nut torque
can any one remember the wheel nut torque ??? i have gone blank.CLUB "Ah Shor it'll be grand"
First D3 in the World with a Hydraulic Winch.
2006 Disco 3 TDV6 S Auto,
Diff Locks, Turbochipped, Raised Air Intake, 220volts Onboard, Onboard Compressor, Large Bore Exahust, Underbody Protection, One or two Other Mods as well.
Other toys include, Argo Avenger 8x8, Tatra 6x6 Motorhome (Being Built)
26th Nov 2008 1:28 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
26th Nov 2008 1:31 pm
christyler
Member Since: 31 Dec 2005
Location: Cork, Ireland
Posts: 1168
well i had 140 in my head for some reason, but wasent sure.CLUB "Ah Shor it'll be grand"
First D3 in the World with a Hydraulic Winch.
2006 Disco 3 TDV6 S Auto,
Diff Locks, Turbochipped, Raised Air Intake, 220volts Onboard, Onboard Compressor, Large Bore Exahust, Underbody Protection, One or two Other Mods as well.
Other toys include, Argo Avenger 8x8, Tatra 6x6 Motorhome (Being Built)
26th Nov 2008 1:32 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
ISTR discodunc having a cordless torque gun that went to 130 which was the nut rating. Have searched, but so many to go through it would take forever! If yoiu're on 140 then I think you'll be there abouts Bodsys Brake Bible
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
26th Nov 2008 1:34 pm
christyler
Member Since: 31 Dec 2005
Location: Cork, Ireland
Posts: 1168
yes i think your right, thanks
140 it isCLUB "Ah Shor it'll be grand"
First D3 in the World with a Hydraulic Winch.
2006 Disco 3 TDV6 S Auto,
Diff Locks, Turbochipped, Raised Air Intake, 220volts Onboard, Onboard Compressor, Large Bore Exahust, Underbody Protection, One or two Other Mods as well.
Other toys include, Argo Avenger 8x8, Tatra 6x6 Motorhome (Being Built)
140 +/- 10 Nm I'm not as good as I once was........but I'm as good once as I ever was.
26th Nov 2008 1:51 pm
DiscoDunc
Member Since: 08 May 2006
Location: Bristol
Posts: 16390
140 Nm.
The "Sparky" gun I have goes to 140 but its also best to check with a torque wrench.Duncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide
BS chart say's 112 to 168.(8.8 grade bolt)
"I know that you believe that you understood what you think I said, but I am not sure you realize that what you read is not what I meant"
26th Nov 2008 3:02 pm
captain_sugar
Member Since: 05 Sep 2006
Location: Hradec Kralove
Posts: 1095
Yes, but what about other cars?
It is in the manual for the disco. 140NM
After I started changing wheels myself on the disco, I also ordered a set of weels for the winter tyres for my wife's CRV. The Honda manual doesn't give any info about the torque to be applied. So I gave there as well the 140NM.
Am I doing right?Some people get by
With a little understanding
Some people get by
With a whole lot more
I don�t know
Why you gotta be so undemanding
26th Nov 2008 3:15 pm
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26742
And for the Imperialists amongst us, thats 103 ft/lbs of torque
26th Nov 2008 4:58 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
All the below are for 8.8 grade bolts/nuts and are applied torque in Nm to BS7371 pt 2
M10 41-60
M12 71-105
M14 112-168
M16 175-260
"I know that you believe that you understood what you think I said, but I am not sure you realize that what you read is not what I meant"
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum