Member Since: 11 May 2006
Location: Copenhagen
Posts: 223
Brake dust burn in
Hi
Got my D3 from new summer 2006 and i am experiencing what i think is more and more brake dust burn in on the wheels. I have the 5 spoke, and the problemm seem worst on front wheels, on outside between spokes.
I scrub the wheels with every washing, and I have tried some sonax cleaner and a good scrubbing, but some of the stuff just wont come off.
Have anybody else experienced brake dust burn in, and if so, have you made a warranty claim on it ?
Cheers
Jakob
6th Nov 2008 12:49 pm
DN D3 Decade
Member Since: 24 Jun 2006
Location: W.London.
Posts: 2319
Common problem, unless you don't use your brakes. If you tried a warranty claim and got new wheels it would still occur, until LR make the wheel finish more resilient to this.(Some chance of that ). I realise we shouldn't have to do this, but having them powdercoated may make them less susceptable to burn in / pitting / corrosion etc.
The material is as much metal from the brake rotor as it is copper etc from the pads, the types of finishes applied to the wheel do not help as you have found. the powder coating used is very resilient to impact from road debris but not from red hot shards of rotor embedded in the finish. There is no solution if you want to use your brakes other than change the finish on the wheels
"I know that you believe that you understood what you think I said, but I am not sure you realize that what you read is not what I meant"
6th Nov 2008 2:21 pm
CFB
Member Since: 02 Dec 2005
Location: Bradford, West Yorkshire
Posts: 6100
I use 'wonder wheels' and plenty of wrist action
6th Nov 2008 6:18 pm
Discoeast
Member Since: 19 Feb 2008
Location: Boksburg
Posts: 800
JabobVels,
Picking up from shiny moose, this makes sense to me,
some tend to wait a little later before applying brakes, or the last
moment in daily commuting. Stopping a D3 is a little more
different than a road car with the same HP, we have the weight to
consider. There fore speed x short distance = very hot brakes and
burnt finish on rims. Would suggest you relax more and enjoy your
driving than try keeping up with the speedsters.
You and the D3 will have more D3 bullbar-spots-roof rack with spots-ladder-long range tank-swing out spare wheel carrier- upgraded tow bar-dash console-internal water tank-duel awnings-drawer system & T T.
6th Nov 2008 7:00 pm
SN
Member Since: 03 Jan 2006
Location: Romiley
Posts: 13710
there's a post on here somewhere, I think it was Tazdaz's, using Mr Muscle Oven Cleaner to get the brake dust off Steve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history)
6th Nov 2008 7:22 pm
POINTYED
Member Since: 22 Mar 2008
Location: BURY,LANCS
Posts: 2758
hi
or buy black alloys like i did
dunc life is tooooo short.enjoy the moment.dont worry be happy
club BSS
6th Nov 2008 10:01 pm
JakobVels
Member Since: 11 May 2006
Location: Copenhagen
Posts: 223
Thx for your comments and solutions.
Just wanted to check if there were an isolated batch with these trouble so that a fix could be had from the stealer before warranty expires.
I will settle for thats the way it works.
Thx
Jakob
6th Nov 2008 10:29 pm
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26750
I have never had a car that does not suffer brake dust burn in problems. My wife's Mini Cooper S is terrible for it. The wheels on that are really difficult to clean. The HSE D3 wheels are easy.
I find that a regular polish works wonders, but eventually they will get pitted.
7th Nov 2008 12:48 am
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
I have black wheels, not bothered aboiut brake dust now Bodsys Brake Bible
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
7th Nov 2008 12:42 pm
jkp
Member Since: 17 Sep 2005
Location: Living among Bawbags
Posts: 4528
There are plenty of wheel cleaners on the market that will safely remove baked on brake dust. Autoglym wheel cleaner, megs wheel brightner, menz and zymol wheel gel, autosmart smart wheels. used in the correct concentration and a bit agitation with a wheel brush, they will come up well. Not sure about the Mr Muscle as i suspect that would remove much more than the brake dust....
The key to keeping them like that is adding a protective coating, such as Jetseal 109, poorboys Ex-P or using your paste wax, which will protect them. Using a dedicated wheel sealant like Poorboys wheel seal will ensure future removal of dust is a lot, lot easier. It will also add protection to the wheels during the winter months.
7th Nov 2008 12:58 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
Slight OT, but still OT, I used to get really annoyed at not being able to easily clean the back of the wheels & all of the inside wheel. Are there any cheap geeky tools that you've used that make it easier than taking the wheels off?
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
7th Nov 2008 1:02 pm
jkp
Member Since: 17 Sep 2005
Location: Living among Bawbags
Posts: 4528
Bodsy wrote:
Slight OT, but still OT, I used to get really annoyed at not being able to easily clean the back of the wheels & all of the inside wheel. Are there any cheap geeky tools that you've used that make it easier than taking the wheels off?
Cheers
There are plenty wheel brushes out there, I use the EZ detail brush and one that looks like a 'loo brush' and for all it's hype that is exactly what it is with a slightly softer brush tip To make them the most effective you need to allow the wheel cleaner time to loosen the gunk off.
I'm looking at getting some into the shop, possibly by the end of the month.
7th Nov 2008 1:14 pm
jkp
Member Since: 17 Sep 2005
Location: Living among Bawbags
Posts: 4528
Just to add those are only suitable for wheel inners and not the wheel faces.
Here's one for anyone who is court short without their favourite alloy wheel cleaner. Throw a can of coke over them and then wash off, coke apparently contains 5% phosphoric acid, as much as in some wheel cleaners
"I know that you believe that you understood what you think I said, but I am not sure you realize that what you read is not what I meant"
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum