Member Since: 23 Feb 2007
Location: Dubai
Posts: 509
Wrench is knackered
Was changing my wheels over yesterday (putting on the 18s while getting the MTR's onto my Black rims) and was opening the nuts on the front left wheel when BANG the wrench split . I mean to split from the opening that goes over the nut back to the hinge and is no longer useable. Now I have in the past had to jump up and down on a wrench to get a wheel nut open but I was literally pulling upwards with two hands when it let go. The only time I'd used it before was to take the wheels off to fix the winch and to replace the locking nuts.
Really glad I wasn't in the middle of nowhere . Went our and purchased a heavy duty one from the local motor factors but I am very unimpressed with the quality of this vital tool. Think I'll complain to the stealer tomorrow.1993 Defender 110 300tdi - many mods
19th Oct 2008 3:14 pm
GLYNNE
Member Since: 06 Oct 2006
Location: KENT
Posts: 4671
Exactly the same happened to mine,and as you have done bought one that is actually fit for the job
19th Oct 2008 3:59 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50971
Are you sure you are using it the right way around?21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
19th Oct 2008 4:00 pm
DiscoStu
Member Since: 09 Apr 2006
Location: London
Posts: 11412
They suffer with stress fractures all he time.
"I know that you believe that you understood what you think I said, but I am not sure you realize that what you read is not what I meant"
19th Oct 2008 8:31 pm
yawlboy
Member Since: 23 Feb 2007
Location: Dubai
Posts: 509
DG the split was in the actual socket, see the following (bad) photos:
1993 Defender 110 300tdi - many mods
19th Oct 2008 9:27 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50971
Ah you're obviously heavier than me then
Christ man ...get yourself decent equipment like Ken says
keep inside some pipe insulation and it will sit nicely undeneath the 3rd row of seats near the socket to lower the spare wheel, alternatively get the torque wrench as well and both will fit in the tube the torque wrench comes in and can be stored in the same place - that way you have all angles covered (as i now have). A very neat and reassuring solution!
19th Oct 2008 9:41 pm
dick dastardly
Member Since: 29 May 2007
Location: wiggleigh bottom
Posts: 1112
Nuts must be twisted with enough but not too much force. Use a talk wenchThere's one wheel on my wagon, but i'm still rollin' along, it's the cherokee, they're after me, but I'm singing a happy song
19th Oct 2008 9:58 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50971
dick dastardly wrote:
Use a talk wench
What will it say ? 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum