Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Maintenance & Mods (D3)

How to change the CC accelerator switch on the wheel?
Post Reply  Down to end
Page 1 of 1
Renton
 


Member Since: 13 Jan 2009
Location: Somewhere in the middle
Posts: 1718

2005 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3
How to change the CC accelerator switch on the wheel?

The accelerator switch on my wheel has flaws causing the CC to switch off and stay off. Its not under warranty so I thought changing it myself. Is this difficult and does it involve taking out the airbag as well?
All instructions welcome Bow down
  
Post #47996311th Jun 2009 1:58 pm
View user's profile Send private message View poster's gallery Reply with quote
NoDo$h
 


Member Since: 02 May 2006
Location: Finding new and exciting ways to milk badgers.
Posts: 19689

Ukraine 

It may well be the clock spring (rotary coupler) rather than the switch. It's a known problem.

Details here on the TSB etc:

http://www.disco3.co.uk/forum/topic32361.h...p;start=15

Also an example of a member getting work done free of charge outside warranty here:

http://www.disco3.co.uk/forum/topic34098.h...p;start=15
 I know it's not considered "kind" to say no these days, but no. Just no, ok? And if it's not ok, still no. 

Last edited by NoDo$h on 11th Jun 2009 2:23 pm. Edited 1 time in total 
Post #47996911th Jun 2009 2:17 pm
View user's profile Send private message View poster's gallery Reply with quote
NoDo$h
 


Member Since: 02 May 2006
Location: Finding new and exciting ways to milk badgers.
Posts: 19689

Ukraine 

Oh, and although it is out of warranty, I think it may be worthwhile contacting your dealer to check to see if the work to replace the coupler has already been done as per that bulletin. If it hasn't you may have a case for them doing the work anyway Thumbs Up
 I know it's not considered "kind" to say no these days, but no. Just no, ok? And if it's not ok, still no.  
Post #47997011th Jun 2009 2:18 pm
View user's profile Send private message View poster's gallery Reply with quote
Renton
 


Member Since: 13 Jan 2009
Location: Somewhere in the middle
Posts: 1718

2005 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

Already had the rotary coupler fixed under warranty. First day it looked fine but then I got the same symptons again and it got to a point the CC didn't worked at all.
Brought the car to the dealer last Tuesday. They tested the wiring and said it was fixed. Its much better now but the CC still switches off every now and then. Only when I turn off the ignotion it comes back on again.
Called the dealer to tell them that the CC bug is still there and now they advise to change the +/- switch.
  
Post #47997611th Jun 2009 2:45 pm
View user's profile Send private message View poster's gallery Reply with quote
NoDo$h
 


Member Since: 02 May 2006
Location: Finding new and exciting ways to milk badgers.
Posts: 19689

Ukraine 

In that case, look at the thread on changing your steering wheel Thumbs Up

You'll need to disconnect the battery for 15 minutes or so before you remove the airbag, then you can remove the steering wheel and access the buttons.

http://www.disco3.co.uk/forum/topic32646.html
 I know it's not considered "kind" to say no these days, but no. Just no, ok? And if it's not ok, still no.  
Post #47997811th Jun 2009 2:49 pm
View user's profile Send private message View poster's gallery Reply with quote
Renton
 


Member Since: 13 Jan 2009
Location: Somewhere in the middle
Posts: 1718

2005 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

Yeah thanks! Already looked at that thread but it doenst show how the buttons itself are removed. Wasn't sure if I needed to remove the airbag when I want to change the switch.
  
Post #47997911th Jun 2009 2:55 pm
View user's profile Send private message View poster's gallery Reply with quote
NoDo$h
 


Member Since: 02 May 2006
Location: Finding new and exciting ways to milk badgers.
Posts: 19689

Ukraine 

Yup, you'll need to do the battery, pull the airbag and then you can get to the switches. They're connected to the black plastic cowling on the reverse of the steering wheel. You'll need a T25 torx key to remove them Thumbs Up

Really quick job though.
 I know it's not considered "kind" to say no these days, but no. Just no, ok? And if it's not ok, still no.  
Post #47998311th Jun 2009 3:02 pm
View user's profile Send private message View poster's gallery Reply with quote
Slimer
Site Moderator 


Member Since: 06 Jan 2005
Location: Last Exit to Nowhere
Posts: 16295

United Kingdom 

 The End  
Post #47999211th Jun 2009 3:18 pm
View user's profile Send private message View poster's gallery Reply with quote
Renton
 


Member Since: 13 Jan 2009
Location: Somewhere in the middle
Posts: 1718

2005 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

Very helpfull guys, thanks! Bow down
  
Post #47999911th Jun 2009 3:26 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site