Member Since: 19 Sep 2006
Location: Reading
Posts: 380
Tailgate trim/handle Removal
Need some help please - I'm trying to get into the tailgate handle to add a camera. I've done some searching and it would be believed its a case of the damn plastic clips... but I can't get it off.
So the question is any tips (the four torx screws on the tailgate - do they need removing?)
I can't believ I'm asking as I was there when Fisherman had his ladder fitted at a SE meet my brain must be pickled!!
TA in advance Richard......
2006 HSE Lugano Teal - with screens a DVD....PS2.... Freeview, and MANTEC plate!
2007 XS Commercial Java Black - with leather, Aux Battery and MANTEC plate
LR tech info. Hold on while I try and post a link to the right pageI know it's not considered "kind" to say no these days, but no. Just no, ok? And if it's not ok, still no.
I know it's not considered "kind" to say no these days, but no. Just no, ok? And if it's not ok, still no.
Last edited by NoDo$h on 24th Aug 2019 8:25 am. Edited 1 time in total
26th Sep 2008 9:24 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50978
No link
Anyway Richie
Undo the 4 torx.... take out the rubber grommet around the closer latch....pop the inside plastic panel off use a flathead to get you started (don't overly worry about the clips) ...unclip the light\ latch power harness on the handle ....undo the 2 bolt heads on the back of the handle ...bobs your uncle 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
I know it's not considered "kind" to say no these days, but no. Just no, ok? And if it's not ok, still no.
Last edited by NoDo$h on 24th Aug 2019 8:26 am. Edited 1 time in total
27th Sep 2008 9:03 pm
RichieP
Member Since: 19 Sep 2006
Location: Reading
Posts: 380
DG - Only wish I'd read it properly before starting the work... and its 3 nuts on the inside!
Nightmare!!!! Might need some advice on tuesday!!! as to waht to do next!
NoDo$h - Thanks but wrong end of car!!!! but in fairness that diagram doesn't state the number of bolts and nuts that need 'doing' to get it off....Richard......
2006 HSE Lugano Teal - with screens a DVD....PS2.... Freeview, and MANTEC plate!
2007 XS Commercial Java Black - with leather, Aux Battery and MANTEC plate
27th Sep 2008 9:36 pm
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
Nightmare? 20 mins at most
you do have a rivnut tool....don't you?
I know it's not considered "kind" to say no these days, but no. Just no, ok? And if it's not ok, still no.
Last edited by NoDo$h on 24th Aug 2019 8:27 am. Edited 1 time in total
28th Sep 2008 9:01 am
RichieP
Member Since: 19 Sep 2006
Location: Reading
Posts: 380
OK there may have been a misunderstanding.... (i/m not fitting a ladder yet!!!)
I have done the job, I messed up now my handle 'system' doesn't quite meet the tailgate - and I'm worried that water will now pour in to the rear section of the D3
Now before you all go MUPPET!!! I've already said it to myself an number of times. I will be looking on Tuesday for Ideas as to how to rectify the situation from people who are less muppet than me.... those that are should not comment... its sore!!!!
Still smiling just Richard......
2006 HSE Lugano Teal - with screens a DVD....PS2.... Freeview, and MANTEC plate!
2007 XS Commercial Java Black - with leather, Aux Battery and MANTEC plate
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
my brain must be pickled!!
