gerhardt
Member Since: 13 May 2008
Location: Gauteng
Posts: 29
  
|
Confused  - Just finished fitting upgraded towbar (FR), template for reshaping cover worked well  , although the cutting was hazerdous to say the least. however end result looks good. Whislt uder the vechile noticed two large lumps of metal on either side mounted on free swinging shafts.  What are these and what is the pupose.  First time owner previos LC neever had anything like these.
|
 21st May 2008 5:30 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
  
|
Harmonic Dampers.....
Stops you gettting car sick Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 21st May 2008 5:32 pm |
|
|
gerhardt
Member Since: 13 May 2008
Location: Gauteng
Posts: 29
|
Thanks for the info- any chance of them (shafts) been immobilized by debris or mud.
|
| 21st May 2008 5:48 pm |
|
|
|
|
heine
Member Since: 07 Feb 2007
Location: Midrand
Posts: 4054
|
gerhardt wrote:Thanks for the info- any chance of them (shafts) been immobilized by debris or mud.
If they swing freely front to back they are working . One of mine did come lose though
|
| 21st May 2008 6:00 pm |
|
|
Deondef
Member Since: 08 May 2007
Location: Randburg
Posts: 790
|
After fitting dual battery system - the power lead to the tow hitch interfered with the right rear swinging thing. I picked up a lot of vibration and by accident noticed this. After a couple of cable ties it was sorted and vibration gone 
|
| 22nd May 2008 7:08 am |
|
|
heine
Member Since: 07 Feb 2007
Location: Midrand
Posts: 4054
|
Hi Tech things D3's 8)
|
| 22nd May 2008 7:41 am |
|
|
