Garwood56
Member Since: 24 Jun 2021
Location: West Sussex
Posts: 450
  
|
| Changed fuel filter and now FBH won’t kick in 🤬 |
|
Not sure if anyone can shed any light on the following. So I’ve replaced the fuel filter, bled system using the Schrader valve at back of engine. Engine fires up perfectly, however it was 2 degrees outside and yet the FBH won’t start!
Just a note the FBH has been working without issue for years.
Thanks.
|
 22nd Nov 2024 6:42 pm |
|
|
Garwood56
Member Since: 24 Jun 2021
Location: West Sussex
Posts: 450
|
Panic over. Had a battery disconnect fault on Autel, low voltage. Codes removed and it 🔥 up no problem. 👍
|
| 22nd Nov 2024 7:47 pm |
|
|
Worms
Member Since: 24 Sep 2023
Location: Highlands
Posts: 415
 
|
Whew! Good result! In this weather the FBH is a godsend! Previously:
2010 FL2 TD4e GS
‘93 Defender 110 200TDi CSW - still got this, non-runner on SORN.
‘87 Defender 90 4 cyl Petrol
‘83 110 CSW V8 - best ever!
Range Rover 2-door V8 (not sure of year - 4-speed box and vacuum diff switch)
Series III SWB Diesel
|
| 23rd Nov 2024 6:44 am |
|
|
Garwood56
Member Since: 24 Jun 2021
Location: West Sussex
Posts: 450
|
Cheers Worms..yes much needed and the term “Sod’s Law” came to mind. Especially as I organising a small group of mates with Landies and heading up to Glencoe before Christmas 👍
|
| 23rd Nov 2024 7:21 am |
|
|
BrumLee
Member Since: 07 Mar 2008
Location: West Midlands
Posts: 1367
|
Now and again I have to disconnect the FBH for 20 seconds and reconnect it if it doesn't fire up. Tested it with Webasto diagnosis software, but doesn't show any issues  Faultmate MSV2 EXTREME
FOXWELL N624 Elite
Hantek 1008c Oscilloscope
|
| 24th Nov 2024 4:17 pm |
|
|
