FraserBarsby
Member Since: 19 Nov 2024
Location: Liverpool
Posts: 3
  
|
| Swapping out the rear prop |
|
I swapped out the rear prop yesterday - video will be on the channel soon. Just thought it was worth a mention that getting the rear studs out can be a bit of a mission. Because they're thread locked you have to heat each bolt up before removal to melt the thread lock. Then it's easy. I leaned the hard way!
I've fitted an aftermarket prop which as a kit came in at £280 plus VAT. It's supposed to be a lot better than previous cheaper aftermarket ones. I'll let you know how I get on with itl
|
 21st Nov 2024 9:44 am |
|
|
Gary_P
Member Since: 03 May 2016
Location: Kent
Posts: 1682
  
|
Thanks for sharing. Well done.
https://www.disco3.co.uk/forum/post2380839...10#2380839
Some have done this upgrade to the centre bearing, which goes every few years it seems. Gary
-------------------------------------------
Discovery 4 HSE 2016MY
|
| 21st Nov 2024 10:01 am |
|
|
Martin
Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18573
|
Please don't use this forum as a free advertising platform - it isn't...
Commercial Posting Rules 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
|
| 21st Nov 2024 11:25 am |
|
|
