| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
lindencahill
Member Since: 16 Mar 2015
Location: huddersfield
Posts: 71
 
|
with all the issues with our cranks and bearing failure was wondering if anyone had thoughts on using Cera-Tec from Liqui Molly.
ive just read a very good article on it in Profesional Motor Mechanic Magazine october issue
seems well tested by research bodies
might be worth a go
|
 29th Oct 2024 2:56 pm |
|
|
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6400
 
|
just use 5W40 my motor since started using it runs smoother bit more quiet and gets to pressure much quicker on cold start
|
| 29th Oct 2024 3:11 pm |
|
|
lindencahill
Member Since: 16 Mar 2015
Location: huddersfield
Posts: 71
|
so much confliction on oil grades
not disagreeing with you 
|
| 29th Oct 2024 3:13 pm |
|
|
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6400
|
well just stated my observation
also hear ceramizers do miracles and some run motors on ceramizers with no oil lol
|
| 29th Oct 2024 3:18 pm |
|
|
lindencahill
Member Since: 16 Mar 2015
Location: huddersfield
Posts: 71
|
very brave man who does that lol
|
| 29th Oct 2024 3:21 pm |
|
|
C.French145
Member Since: 14 May 2023
Location: South Lanarkshire, Scotland
Posts: 112
 
|
IMO - products that are sold to offer protection etc won’t do much harm. But a miracle product to stop cranks and bearings wearing/failing, perhaps not.
Change your oil frequently with high quality products. They all have a level of protection and additives in them. But these degrade over use. Do some research on how often people change theirs. We are all different. I change my every 3-4 months or 3-4k miles. What ever oil grade you decide is best. Craig.
~~~~~~~~~~~~~~~~~~
Current -
Discovery 4, 2015 HSE Lux. SDV6.
Previous -
D2 2003 TD5.
110 1997 300tdi.
|
| 29th Oct 2024 6:33 pm |
|
|
Jimbob42
Member Since: 23 Mar 2022
Location: Leicester
Posts: 182
 
|
lindencahill wrote:with all the issues with our cranks and bearing failure was wondering if anyone had thoughts on using Cera-Tec from Liqui Molly.
ive just read a very good article on it in Profesional Motor Mechanic Magazine october issue
seems well tested by research bodies
might be worth a go
I’ve just bought a can of it. I’ve just replaced the engine in the d4 with a jag donor on 118k. It has oil changes between 5 and 9k annually so has been looked after. No harm in an additive if it helps.
|
| 29th Oct 2024 8:04 pm |
|
|
NC500
Member Since: 18 Sep 2017
Location: On the NC500
Posts: 541
|
I used Ceratec for many thousands of miles and the oil analysis on every oil change showed no change in wear rates. Please see the thread: https://www.disco3.co.uk/forum/topic204628.html
The most important additive I have used is a fuel treatment to keep the injectors clean. Fouled injectors not only increase crank times (hence increased wear) but also soot build up in the oil.
This is no my opinion, it is born out in the data.
|
| 30th Oct 2024 7:36 am |
|
|
lindencahill
Member Since: 16 Mar 2015
Location: huddersfield
Posts: 71
|
C.French145 wrote:IMO - products that are sold to offer protection etc won’t do much harm. But a miracle product to stop cranks and bearings wearing/failing, perhaps not.
Change your oil frequently with high quality products. They all have a level of protection and additives in them. But these degrade over use. Do some research on how often people change theirs. We are all different. I change my every 3-4 months or 3-4k miles. What ever oil grade you decide is best.
thanks,
im definetley changing mine every 3000 miles,i always try and use petronas oil with a genuine oil filter,plus only use shell v-power diesel
|
| 30th Oct 2024 8:29 am |
|
|
lindencahill
Member Since: 16 Mar 2015
Location: huddersfield
Posts: 71
|
NC500 wrote:I used Ceratec for many thousands of miles and the oil analysis on every oil change showed no change in wear rates. Please see the thread: https://www.disco3.co.uk/forum/topic204628.html
The most important additive I have used is a fuel treatment to keep the injectors clean. Fouled injectors not only increase crank times (hence increased wear) but also soot build up in the oil.
This is no my opinion, it is born out in the data.
i use only shell v-power diesel i think thats got good data for protection of injectors,what additive if any would you use with this fuel ?
|
| 30th Oct 2024 8:32 am |
|
|
NC500
Member Since: 18 Sep 2017
Location: On the NC500
Posts: 541
|
I have no personal recommendations! I live on the very far north coast of Scotland and we don’t have ANY performance fuel products sold north of Inverness so I have no experience!!
|
| 30th Oct 2024 9:38 am |
|
|
MrTed
Member Since: 06 Jan 2023
Location: Rickmansworth
Posts: 190
|
lindencahill wrote:NC500 wrote:I used Ceratec for many thousands of miles and the oil analysis on every oil change showed no change in wear rates. Please see the thread: https://www.disco3.co.uk/forum/topic204628.html
The most important additive I have used is a fuel treatment to keep the injectors clean. Fouled injectors not only increase crank times (hence increased wear) but also soot build up in the oil.
This is no my opinion, it is born out in the data.
i use only shell v-power diesel i think thats got good data for protection of injectors,what additive if any would you use with this fuel ?
Personally, I find a huge difference in performance with v-power diesel against standard in my D4 but on the flip side of the coin, a huge reduction to my bank balance when I fill-up with v-power exploding dinosaur liquid (with additives). Discovery 4 HSE late 2015 Euro6
Jaguar XF Portfolio (PX'd for above)
Mitsubishi Galant V6 (PX'd for above)
Instagram: @mrtedgfx
|
| 30th Oct 2024 10:11 am |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.
