| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
winllan1
Member Since: 29 Dec 2012
Location: Pwllheli, Gwynedd, Wales
Posts: 17
  
|
I've searched the forum, and cannot seem to find any clear thoughts.
For the past couple of days, when pressing the accelerator nothing happens, regardless of how harsh or gentle one presses the throttle. After the accelerator is pressed and depressed a couple of times it does eventually work.
When starting this morning, the accelerator did not function until about 10 attempts.
The car drives sounds and works fine, with no warning lights or restricted performance.
And touch wood, it's not had any faults or anything replaced recently which could be a contributory factor apart from a set of tyres.
Any thoughts would be appreciated.
12 plate D4
|
 9th Feb 2024 8:45 am |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10674
  
|
Probably needs a pedal assembly. It’s all electric.
You could unplug it and reconnect to see if that helps
Faults codes should tell you something
|
| 9th Feb 2024 12:28 pm |
|
|
DN
D3 Decade
Member Since: 23 Jun 2006
Location: W.London.
Posts: 2344
 
|
If I use ( very rarely) my FBH remote to run the heater for 20-30 mins before starting, I sometimes get the unresponsive throttle pedal for 10 secs or so. I put this down to there being a temperature mismatch ie. a relatively cold engine oil temp signal conflicted by an almost fully warm coolant temperature signal. Maybe you have a problem with one of your temp sensors, either oil, or coolant ? If you can, look at the live readings of both, to see if they are realistic or not. D3 owned from new, P017 brake recall, BAS FBHIC, new FBH, LR013487 oil pump, new water pump. RRS front lower suspension arms. New suspension compressor/ relay. New Denso alternator. CuNifer rear brake pipes. New GKN rear propshaft. New HPFP belt & tensioner. New A/C Condenser.NO WARRANTY for many many years.
|
| 9th Feb 2024 1:29 pm |
|
|
Gilgamesh
Member Since: 01 Feb 2024
Location: Beckenham
Posts: 16
|
A faulty accelerator pedal sensor can cause symptoms such as delayed or erratic response, reduced performance, or even no response at all. Though I am not sure that's the main issue here, You should take it to a mechanic.
|
| 29th Feb 2024 11:48 am |
|
|
winllan1
Member Since: 29 Dec 2012
Location: Pwllheli, Gwynedd, Wales
Posts: 17
|
Update,
The throttle was changed as a replacement was £15 from eBay.
A couple of days later - restricted performance...
The front MAF sensor was replaced (the second one in our ownership) - and all is well.
Whether the throttle needed to be replaced remains a good question.
Thanks for all the suggestions.
|
| 2nd Mar 2024 7:32 pm |
|
|
mew1253
Member Since: 11 Nov 2017
Location: Telemark
Posts: 4
 
|
When I start first time I get a very rough idle and no throttle responses.
After the engines warms up the throttle responds to pedal movement.
No faults displayed by the IID. Cleaned the MAF sensor and no difference?
Anny Ideas?
|
| 29th Sep 2024 8:28 am |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.
