Ammdaz
Member Since: 17 Oct 2023
Location: Kent
Posts: 69
  
|
| Getting car in neutral for propshaft swap |
|
I'll be changing the propshaft on our 2015 D4, so I know I need to turn the propshaft to get to all the bolts. From what I've read I need to jack 1 wheel up and get the car in neutral to turn it to access the remaining bolts. My question is how can I keep the car in neutral and get the handbrake off without starting the car as the rotary dial only raises when the car starts? Or do people use the neutral over ride under the cup holder, or can you start it, do what you need then shut it off again, is that simple and I'm overthinking it? Thanks 👍
|
 2nd Sep 2024 7:10 am |
|
|
eightfoot
Member Since: 12 Apr 2015
Location: sunny essex
Posts: 806
 
|
info is in the handbook but short answer is cup holders out lift red lever turn slotted lock then lift the red lever fully to engage neutral  please excuse any grammer/punctuation mistakes,i'm thick,thankyou
current vehicles 2005 d3 2013 d4
|
| 2nd Sep 2024 10:10 am |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10684
 
|
don't you switch the engine off, with it in N. Should stay like that for 10 mins
|
| 2nd Sep 2024 1:33 pm |
|
|
Ammdaz
Member Since: 17 Oct 2023
Location: Kent
Posts: 69
|
All done and new prop on 👍
|
| 2nd Sep 2024 1:35 pm |
|
|
