Member Since: 15 Oct 2011
Location: west sussex
Posts: 78
Transfer Case control module
Click image to enlarge
HI hope some 1 can answer this for me i need to change the Transfer Case control module behind the battrey ,so do i need to get the same number as the old one ie NNW 504 660 OR can i just get any one . many thanks for your help in advanced .
27th Jul 2024 8:38 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5059
If I recall correctly there's only one type available for D3/4 but you'll need to calibrate it.
Can't recall if it needs coding but I believe it should work once calibrated.yµ (idµ - eAµ) ψ=mψ
28th Jul 2024 3:19 pm
Duc750
Member Since: 07 Aug 2017
Location: northampton
Posts: 314
just needs calibrating - the number only relates to the strategy and firmware on the board - obviously later is generally considered better.
I opened my last one up and spent a bit of times coating the board and sealing the case before closing it up again05 D3 V8 HSE, LR Passion tree bars, wildbear compressor guard, LRP switch panel, ARB rear locker + compressor, Trigger 6 shooter electrical system
12 RRS SDV6 HSE (Hers) - Gone and replaced with an I Pace - I can tell you now EV is not the future yet
Metalian Camper trailer
29th Jul 2024 8:41 am
ac53
Member Since: 15 Oct 2011
Location: west sussex
Posts: 78
thank you fitted a 2nd hand one today all good no funny lights on dash now lol
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
