Member Since: 16 Jul 2017
Location: Upphärad,west coast
Posts: 65
Access for screw inlet manifold RH sdv6 D4
Hi all,
So now time for next problem:cracked RH manifold.
I have a question: do anyone have an overview how EGR and is assy to motor? Reason for askungen is that inlet got a screw impossible to reach without EGR(or it bracket? out of the way.
See picture and screwdriver shows the location of screw for manifold.
Thanks
Johnny
Click image to enlarge
4th Jul 2024 10:58 am
Tyty
Member Since: 18 Aug 2022
Location: South West
Posts: 77
You have to take the fuel rail bracket off, and will need to slacken off the EGR valve in order to do this which is held on by 3 bolts.
4th Jul 2024 12:27 pm
Holmkiern
Member Since: 16 Jul 2017
Location: Upphärad,west coast
Posts: 65
Ok,thanks.
So 3 bolts to release EGR and then how many for the bracket? 2 bolts is taken away from bracket but maybe there are more bolts?
4th Jul 2024 1:56 pm
Tyty
Member Since: 18 Aug 2022
Location: South West
Posts: 77
2 bolts secure the fuel rail bracket to the cylinder head, and once that is out the way you can get to that bolt
4th Jul 2024 3:19 pm
Holmkiern
Member Since: 16 Jul 2017
Location: Upphärad,west coast
Posts: 65
Thanks,
I just needed to unscrew the top screw on EGR and then the bracket came loose.
Now its just to find all cover screws in all hamnens and pipes..good to have the new cover to look on.
All best
Johnny
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum